Gamecube wiikey fusion with citrus3000 pcb

Portables, case replacements, mods etc, all in here!
Post Reply
gorgyrip
Posts: 7
Joined: Thu Nov 15, 2018 9:25 pm

Gamecube wiikey fusion with citrus3000 pcb

Post by gorgyrip » Tue Feb 11, 2020 2:07 pm

I ordered this pcb from oshpark: https://oshpark.com/shared_projects/kHW2ONDo
In the gamecube I removed the 4 array filters plus the FIL1 filter. After that i connected the pcb.
Now when I power the console, it asks me to set the language. After that it tells me to press any button tos et up the calendar.
When I do that I get the message: "An error has occured...."
Is it because i removed those filters?
SkydivinGirl
Posts: 27
Joined: Sun Sep 15, 2019 3:42 pm

Re: Gamecube wiikey fusion with citrus3000 pcb

Post by SkydivinGirl » Wed Feb 12, 2020 4:19 pm

Shouldn't be because you removed those items. I did the same install and didn't have any trouble.

Heather
gorgyrip
Posts: 7
Joined: Thu Nov 15, 2018 9:25 pm

Re: Gamecube wiikey fusion with citrus3000 pcb

Post by gorgyrip » Wed Feb 12, 2020 8:50 pm

My mistake. I didn't had a sd card connected :D
User avatar
Diego borella
Posts: 128
Joined: Sat Jan 11, 2020 8:37 pm
Location: Brazil

Re: Gamecube wiikey fusion with citrus3000 pcb

Post by Diego borella » Sat Mar 14, 2020 9:36 pm

SkydivinGirl wrote:
Wed Feb 12, 2020 4:19 pm
Shouldn't be because you removed those items. I did the same install and didn't have any trouble.

Heather
does this PCB have the same function as a megadrive produced by the megalomaniac?
there is the need for Wiikey fusion; would it be this?
:?:
Post Reply