Page 3 of 6
Re: Wiikey fusion GC's - post your pictures!
Posted: Wed Mar 21, 2012 5:49 pm
by HomelandReloaded
Thanks for posting this; it looks like exactly what I want to do but on a Japanese Cube (so I can edit isos). I wasn't sure before if a Wiikey could be installed without a WODE or something else.
I am a newb at soldering and I tried today to install a region switch on a Japanese Cube and failed because I hadn't realised just how small everything is. (I did manage to convert it to an US Cube now which I needed anyway!) This project looks a little easier except for the FFC cable, but at least I can replace the cable and try again instead of messing up the PCB.
Re: Wiikey fusion GC's - post your pictures!
Posted: Wed Mar 21, 2012 10:53 pm
by liquitt
HomelandReloaded wrote:This project looks a little easier except for the FFC cable
no, not at all. believe me. a region switch is a piece of cake compared to this
Re: Wiikey fusion GC's - post your pictures!
Posted: Thu Mar 22, 2012 3:26 am
by HomelandReloaded
I meant easier in the sense that the soldering points on the PCB are bigger. This is certainly a much more complicated project, but hopefully more forgiving of mistakes. After one error with the region switch I was left with nothing to connect the wire to, so I just laid it across the two points and soaked it in a bit more solder. I should have got a fine soldering iron and a magnifier when I saw how small the soldering points were, but I was too impatient!
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 9:13 am
by yamaharacer
here is an other fusion cube from me:
specs:
integrated ide/exi
integrated 80GB IDE HDD
integrated 256MB memorycard
integrated wiikey fusion
Only waiting for DMA support.
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 10:56 am
by infact
looks great! do you have any "topless" pics?
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 11:37 am
by yamaharacer
added two more pics from the inside. only the memorycard isnt visible because its soldered on the bottom side of the mainboard.
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 12:37 pm
by emu_kidid
reset button wired up to the WKF?
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 1:01 pm
by yamaharacer
no, I put another switch with hot glue directly under the reset button of the gamecube. when I press the reset button both happens. the gamecube resets and the wiikey fusion too.
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 1:35 pm
by Ashen
Looks awesome man! I love the reset button trick. Does that allow the GC to "autoboot" to the wiikey menu after the reset then?
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 2:36 pm
by yamaharacer
sometimes, not at every reset.
Re: Wiikey fusion GC's - post your pictures!
Posted: Sun Jun 03, 2012 10:09 pm
by liquitt
very freakin' nice!
how do you access the hdd?
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Jun 04, 2012 1:46 pm
by yamaharacer
yeah thats the problem. I have to open the case everytime when I want to put new things on it. maybe swiss gets in the future file browser then I could copy things from the sd card of the Wiikey via the IDE/EXI to the HDD.
But until this happens I have to open the case, disconnect the IDE/EXI and connect the IDE/USB adapter.
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Jun 04, 2012 1:48 pm
by emu_kidid
you can copy files in Swiss, just IDE-EXI write support is buggy
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Jun 04, 2012 1:50 pm
by yamaharacer
ohhh cool thats something I didnt knew before. So hope sometimes the bugs get corrected. But thats a realy good feature.
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Jun 04, 2012 2:34 pm
by liquitt
FTP inside swiss would be amazing, too
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Jun 04, 2012 9:47 pm
by infact
i just use usb while the gc is turned off.
Re: Wiikey fusion GC's - post your pictures!
Posted: Tue Jun 05, 2012 2:01 pm
by yamaharacer
how do you use usb?
Re: Wiikey fusion GC's - post your pictures!
Posted: Tue Jun 05, 2012 9:42 pm
by infact
Y-IDE cable, a switch (toggles ide-exi/ide-usb mode) and an usb2ide adapter.
Re: Wiikey fusion GC's - post your pictures!
Posted: Sat Jun 09, 2012 5:45 am
by yamaharacer
@infact
could you post pictures of yours and mybe explain how to set a switch for using a usb2ide adapter? I didnt get any answer of my PM to you.
emu_kidid wrote:you can copy files in Swiss, just IDE-EXI write support is buggy
how can I do this Emu? With the last revision of Swiss I cant load my IDE/EXI for copy games from it to my SD Card of the Wiikey fusion ant the other way round.
Re: Wiikey fusion GC's - post your pictures!
Posted: Thu Aug 09, 2012 6:49 pm
by Ashen
Re: Wiikey fusion GC's - post your pictures!
Posted: Thu Aug 09, 2012 8:33 pm
by _bud_
I'm glad I've got an awesome portablizing pal to hook me up with a kickass GameCube
I can't wait to get it!
Re: Wiikey fusion GC's - post your pictures!
Posted: Thu Aug 09, 2012 9:42 pm
by megalomaniac
damn ashen...every time you post pics i tend to look more at your clean and tidy workspace...
so organized...
when i organized my stuff i cant find anything....
i leave everything scattered all over and still cant find anything...
nice paint job...
Re: Wiikey fusion GC's - post your pictures!
Posted: Thu Aug 09, 2012 10:48 pm
by emu_kidid
nice GC - MRTN looked like fun.
I need to add that 2 disc support already for Wiikey Fusion
Re: Wiikey fusion GC's - post your pictures!
Posted: Fri Aug 10, 2012 12:14 am
by Ashen
No rush man. The amount of support already there in Swiss is amazing enough.
Thx guys!
Re: Wiikey fusion GC's - post your pictures!
Posted: Mon Aug 20, 2012 6:58 pm
by liquitt
nice mod and also nice video of mrtn! lloks fun