Region Mod

Portables, case replacements, mods etc, all in here!
Post Reply
User avatar
TPSNT
Posts: 33
Joined: Thu May 12, 2011 10:41 pm
Location: Netherlands

Region Mod

Post by TPSNT » Thu Dec 15, 2011 1:28 pm

I have a Japanese cube which I want to change to USA. I have found this tutorial: http://www.mmmonkey.co.uk/console/ninte ... region.htm, but instead of using a switch I want to make it permanent. Is it safe to directly connect the points at R6 or do I need to add a resistor? In the tutorial he is not using a resistor, but they must be there for a reason, right?
Top
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

Re: Region Mod

Post by Ashen » Thu Dec 15, 2011 3:44 pm

Should be safe to just directly connect those points to make it a USA console. Just make sure your connection is secure.
Top
User avatar
TPSNT
Posts: 33
Joined: Thu May 12, 2011 10:41 pm
Location: Netherlands

Re: Region Mod

Post by TPSNT » Thu Dec 15, 2011 10:23 pm

Thanks, that's what I needed to know.
Top
Post Reply

Return to “Hardware / Modding”