Page 1 of 4

Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 2:14 am
by emu_kidid
I'm proud to finally announce the software that I've been developing on and off the past few months or so. I've labelled it "Swiss" because it'll hopefully (not initially) boast more features than any other homebrew Gamecube utility out there. It is very losely based on the SD-Boot source but about 90% was re-written :)

It will be 100% open sourced and available online (probably googlecode) so you can see changes as I make them and I'll be releasing binary versions with every new feature/improvement.

Current Features:
- Load DOL from SD/SDHC/DVD-R/HDD
- Load GCM/ISO from Original Disc/SD/SDHC/DVD-R/HDD
- Multi-Game DVD-R support (Cobra/GCOS)
- Multi-Disc support Original Disc/SD/SDHC/DVD-R/HDD
- Disc Ripping to SD/SDHC/HDD
- Region free / Video forcing (480p)
- Full cheat engine for all games (update it via SD/SDHC/HDD)
*HDD features require a IDE-EXI or homemade adapter
**SD features require a SDGecko or homemade adapter

Definite future features (in order of priority):
- Memory Card Management
- USBGecko/SE support
- IPL/SRAM/DVD-ROM/RAM dumping
- IPL Configuration

A beta version will be available in the next two weeks :)

Image

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 2:41 am
by Cubelover
Finally, thank you so much emu_kidid :D

Image

heh :P

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 3:38 am
by Lander
Nice to see the great advance of this piece of homebrew. Great job emu_kidid :D

I have some questions:

1. "it will be 100% open sourced.....". You mean, the source code available for everyone?
2. "Load GCM/ISO from Original Disc/SD/SDHC/DVD-R/HDD". DVD-R means from burned disk? It will act like GCOS?
Cubelover wrote:Image
I will do it :D

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 3:46 am
by emu_kidid
Lander wrote: 1. "it will be 100% open sourced.....". You mean, the source code available for everyone?
Yep!
Lander wrote: 2. "Load GCM/ISO from Original Disc/SD/SDHC/DVD-R/HDD". DVD-R means from burned disk? It will act like GCOS?
Yep! I forgot to mention Multi-Game / Multi-Disc - I've updated the first post now.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 4:00 am
by tq03q9i
thank you~!emu_kidid~!
this best gift for our!!!!

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 5:17 am
by Ashen
You are the man emu! Great work :)

Does this render our sundriver project useless now?

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 5:31 am
by emu_kidid
No - the Sundriver doesn't require a modchip and I find more interesting ;)

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 6:42 am
by doktor_krotch
Best news I've had all day. Awesome.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 7:44 am
by liquitt
Image

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 11:41 am
by SrTommy
Yeah!!! That's amazing news!!! :D Now, it's only matter of time to the IDE-Exi adapter, hehe!!

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 1:44 pm
by takanari
It's like a dream.
Anyway, how I get an IDE-Exi adapter?
A GIANT THANKS FOR YOU.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 1:52 pm
by liquitt
takanari wrote:It's like a dream.
Anyway, how I get an IDE-Exi adapter?
A GIANT THANKS FOR YOU.
browse the forums a bit more. there a whole area dedicated to the IDE-EXI.
there'll be a huge announcement and 2 shops (germany/australia) where you can order them from.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 2:06 pm
by kevstah2004
No chunk ripping option for SD? I guess that isn't so much of an issue anymore anyway with the release of IDE2EXI.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 2:17 pm
by takanari
liquitt wrote:
takanari wrote:It's like a dream.
Anyway, how I get an IDE-Exi adapter?
A GIANT THANKS FOR YOU.
browse the forums a bit more. there a whole area dedicated to the IDE-EXI.
there'll be a huge announcement and 2 shops (germany/australia) where you can order them from.
Thanks.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 3:02 pm
by YuanZ
Progressive mode support, finally :). Can't wait to test it.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Thu Jan 20, 2011 4:17 pm
by Aressi
Amazing, you are the best

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Fri Jan 21, 2011 12:51 am
by alternati
Amazing, here in Spain we only have Albacete knives, but only serve to cut... Your Australian (sorry, Swiss) Knifes will have more interesting uses (Hehehe)

Joking aparts, many thanks for dedicate your time to GC-Community !!!

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Fri Jan 21, 2011 4:10 pm
by Johnny_Bigtime
I dig the interface icons. Very MAC OSXish.

Will I be able to boot from DVD on a Wii in GC mode? GCOS always rebooted my system or would not run when I tried to swap discs.

In other news...this is excellent work.

I will def be shooting a donation your way.

~Johnny_Bigtime

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Fri Jan 21, 2011 4:46 pm
by Cubelover
@Johnny_Bigtime: Swiss is a gc homebrew. Any gc homebrew is launched in GC mode.

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Fri Jan 21, 2011 6:19 pm
by WiiPower
It will most likely only play GC retail discs on a softmodded wii if that's what you are asking. On a gamecube it can change the dvd drive's firmware to read DVD-Rs, which is something that impossible on a wii. If you look at NeoGamma(or WiiGator's GC backup loader), you see that GC DVD-Rs are possible on a wii, but that would require its own (a bit complicated) code. I think swiss will concentrate on being run on an actual gamecube, everything that works on a wii too is just bonus, so it will have lowest priority if it's done at all.

But i do hope that basic wii support will be done eventually, like running retail GC games with cheats, or the Wind Waker fix. If it's just the gamecube code without tweaks for the wii, i expect retail audio streaming discs to fail, and WW will freeze when you open the minimap(DVD/SD/HDD independent).

But first things first: Let the master do his work and then we can see what we get

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Fri Jan 21, 2011 6:47 pm
by andzlay
YEAH that's awesome news. And I love open source!

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Sat Jan 22, 2011 2:22 am
by liquitt
WiiPower wrote:I think swiss will concentrate on being run on an actual gamecube, everything that works on a wii too is just bonus, so it will have lowest priority if it's done at all.
afterall, this is gc-forever.com :D

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Sat Jan 22, 2011 12:10 pm
by maflom
Great tool, I'm really looking forward to test it out :)

But I have a question...
The announcement mentions loading backups from SDHC would be possible. But according to my informations SD Gecko doesn't support SDHC >= 4GB, so how would this work?

Or am I wrong?

Sorry if my question is stupid and thanks for anyone answering!

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Sat Jan 22, 2011 12:16 pm
by KirovAir
Thanks for all your GC stuff emu_kidid, I'm glad that my favorite console is far from dead!
Looking forward to the release. :)

Re: Announcing Swiss - The "Swiss Army Knife" of GC software

Posted: Sat Jan 22, 2011 1:11 pm
by WiiPower
liquitt wrote:
WiiPower wrote:I think swiss will concentrate on being run on an actual gamecube, everything that works on a wii too is just bonus, so it will have lowest priority if it's done at all.
afterall, this is gc-forever.com :D
I'm not complaining, just talking. Also since it will be open source, i hope it will help me to improve NeoGamma's GC loading.
maflom wrote:Great tool, I'm really looking forward to test it out :)

But I have a question...
The announcement mentions loading backups from SDHC would be possible. But according to my informations SD Gecko doesn't support SDHC >= 4GB, so how would this work?

Or am I wrong?

Sorry if my question is stupid and thanks for anyone answering!
Apparently all memory card <-> sd card adapters "support" sdhc, meaning, all connections are there in the hardware and sdhc is "only" a matter of the used software. Swiss should be able to load games from sdhc cards put in SD Geckos, but don't expect all sdhc cards to work. If you plan to buy one for this, wait for compatibilty lists.