Find all your GameCube topics here
-
liquitt
- Posts: 1776
- Joined: Thu Apr 01, 2010 5:43 am
- Location: neverland
-
Contact:
Post
by liquitt » Tue Apr 24, 2018 10:11 am
liquitt wrote:if somebody needs RITEKG04, i have some tiny spindles left.
pm me
3.5 years later - i still have some

please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
-
Streetwalker
- Posts: 1744
- Joined: Mon Dec 30, 2013 7:50 am
- Location: Israel
Post
by Streetwalker » Sun Jan 13, 2019 4:24 pm
The problem with taobao is that most people outside of China can't buy from there. It would also be more helpful if you linked to actual listings rather than just mentioning the site.
-
Thymo
- Posts: 1
- Joined: Wed Aug 15, 2018 2:16 pm
Post
by Thymo » Tue Apr 02, 2019 10:28 am
I'm based in The Netherlands. What's the best place I can get some 8cm disks at a decent price?
-
64801965
- Posts: 19
- Joined: Thu Sep 13, 2018 7:08 am
Post
by 64801965 » Mon May 06, 2019 5:50 pm
If you could bear long time shipping, Chinese Taobao is a choice.
Dirty night, hard China!!
-
liquitt
- Posts: 1776
- Joined: Thu Apr 01, 2010 5:43 am
- Location: neverland
-
Contact:
Post
by liquitt » Thu Jun 20, 2019 8:51 pm
over a year again - i still have some, somewhere

please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
-
snowekim
- Posts: 5
- Joined: Fri Jun 28, 2019 5:53 pm
Post
by snowekim » Fri Jun 28, 2019 6:14 pm
liquitt wrote: ↑Thu Jun 20, 2019 8:51 pm
over a year again - i still have some, somewhere
PM sent =)
-
Papy.G
- Posts: 593
- Joined: Mon Mar 04, 2019 6:14 am
- Location: France, Occitanie
-
Contact:
Post
by Papy.G » Thu Aug 22, 2019 11:51 am
Cheaper than what I expected!
Comments seems to tell they are good enough to be read on unadjusted laser pot's gamecubes, can you confirm this?
-
Jade1975
- Posts: 3
- Joined: Wed Aug 21, 2019 3:26 am
Post
by Jade1975 » Fri Aug 23, 2019 3:33 pm
I adjust the laser a little bit
-
gmipf
- Posts: 23
- Joined: Sun Sep 08, 2013 10:55 pm
- Location: Germany
Post
by gmipf » Thu Oct 22, 2020 1:43 pm
I have got some new 8cm discs offered as Taiyo Yuden but I think they are fake. The mastering code is DVD-R 4S014.
My Plextor PX-716A detects it as AML. But the weird thing is my other drive ASUS BW-16D1HT detects it as TYG02. How can the same disc output two different media code blocks on different drives?
EDIT: Already toasted first 2 discs and will not try the 3rd. I will send them back.
-
Diego borella
- Posts: 168
- Joined: Sat Jan 11, 2020 8:37 pm
- Location: Brazil
Post
by Diego borella » Wed Oct 28, 2020 10:27 pm
Well, the Ridata mini DVDs, which are the best for the Cube. I would say the ridata ones are the original DVDs for NGC backups.
they are so rare in these parts of Latin America, that I found a Zelda TP in Portuguese, and I ended up adopting it as a Boot DVD. it is so old that it is not even read by Dolphin. it doesn't even pass the initial CGI, but it serves to boot.
I realized that the reader suffers much less with Ridata than with my cut full DVDs.
-
gmipf
- Posts: 23
- Joined: Sun Sep 08, 2013 10:55 pm
- Location: Germany
Post
by gmipf » Thu Oct 29, 2020 9:44 am
I have got these Emtec discs now:
https://www.ebay.de/itm/323963185584
They have the MID OPTODISCR004. I have burned using an ASUS BW-16D1HT v3.10 but they aren't working either. I have reduced the the Laser to 50 Ohm, still no luck with them.
EDIT: I'm considering something like that:
https://www.amazon.co.jp/-/en/gp/product/B002TKI5O2/
But with 8cm diameter to punch full size DVDs. Do someone have experience with cutting DVDs?