3d printed gamecube shell?

Find all your GameCube topics here
Post Reply
weekendgamer
Posts: 49
Joined: Tue Oct 03, 2017 4:59 pm
Location: texas

3d printed gamecube shell?

Post by weekendgamer » Thu Oct 24, 2019 5:24 pm

i was trying to find a 3d printed gamecube shell because i know their a few online that is around like a memory card holder, controller joystick mod, and even custom memory/sd mod. but i can't find a gamecube shell that is somewhat slim that does not have the mini disc drive. does anybody know a site or person who design a shell that is slim and does not have a drive in it.
User avatar
Doctorbeefy
Posts: 12
Joined: Sat Feb 06, 2021 1:10 am
Contact:

Re: 3d printed gamecube shell?

Post by Doctorbeefy » Sat Feb 06, 2021 1:24 am

have you looked at thingiverse.com? You might be able to find a top half and modify it to work.
User avatar
Papy.G
Posts: 639
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: 3d printed gamecube shell?

Post by Papy.G » Sun Feb 07, 2021 6:09 pm

I wonder how it will turn, as the front panel is already quite up, and over the MB top, so getting it flush the top, if not redesigned/trimmed, it may not look that good.
If you have a DOL-101 and don't use the bottom connectors, you may shrink the under part as well.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Post Reply