GameCube HDMI Compatibility

Find all your GameCube topics here
Post Reply
Murder Dog
Posts: 6
Joined: Fri Mar 13, 2020 12:39 am

GameCube HDMI Compatibility

Post by Murder Dog » Sun Mar 22, 2020 10:34 pm

I’m not sure how active this forum actually is but I’d like to ask for personal experience from everyone who has an internal HDMI mod or external HDMI adapters.

After discovering an issue with sound for myself, I began to test my HDMI mod (Pluto board) on a bunch of my TVs and friends TVs and discovered this thing has a ton of compatibility issues. Whether it’s an issue with display or sound this really seems to work 50% of the time which is very disappointing. I can’t find anything discussing this through google or other forums so I felt like it’s just me. I assume the external HDMI adapters would give the same result since almost all of them run off Gc video.

Have any of you ever bought an adapter or completed the mod and found it just doesn’t work with your tv? I’m curious

Is there any sort of fix that could make the signal more compatible such as a converter or anything? This is interesting

Let me know, thank you!
User avatar
Posts: 639
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie

Re: GameCube HDMI Compatibility

Post by Papy.G » Tue Mar 24, 2020 9:45 am

I have a GC Plug, and none of the displays that I tested it with showed problems with video nor sound (I have the 2.4c FW though).

What happens is very strange, unless it's a specific problem to your installation (ie: bad soldering…), even unappropriate TV/display settings must not lead to so much incompatibilities, as long as you use standard video settings from the console (480p is more likely to work on every set you will encounter).
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Posts: 10
Joined: Tue Jan 28, 2020 4:28 am
Location: Brazil

Re: GameCube HDMI Compatibility

Post by lufeig » Sun Aug 30, 2020 2:25 pm

i have an eon gchd mkii (came with custom firmware 2.4b installed) and a pluto ii-x board (came with firmware 2.4d installed), both are currently updated to 3.0e

after configuring them to enhanced dvi mode to enable sound, i never had any issues with any of them.
Posts: 6
Joined: Fri Sep 18, 2020 8:25 am

Re: GameCube HDMI Compatibility

Post by TorqueEmPup » Mon Sep 21, 2020 3:31 am

Well GCVideo devices use enhanced-DVI mode, which doesn't work on all displays, there is an option to disable it through the device itself, but you do lose audio over HDMI and you will need to use the Multi-AV port to get your audio.
Posts: 677
Joined: Wed May 07, 2014 2:24 pm

Re: GameCube HDMI Compatibility

Post by andre104623 » Wed Oct 28, 2020 11:00 am

I was one of the first people to have the pluto 2xHDMI and never had any problems with compatibility but I have had a bad pluto board which would only work on computer displays check all your wiring the 54mhz line is the most important it must must be away from the other wires then check if your flash is good
Post Reply