to make it short: I want to build a custom GCOS for my Qoob Pro and i want to use it instead of the official bios.
So.. how do i build a .gcb file from GCOS source / convert it from gcos.dol?
Basicly the header is pretty easy (http://hitmen.c02.at/files/yagcd/yagcd/ ... ml#sec14.4), could copy it from compiled gcos but i have no idea in which format the "Data" has to be.
Thanks a lot!
Just found this in gcos t3 readme:
will take a look at that ^^If you're going to build this src for a IPL, change the CFLAG -DPSO to -DMOD. Also, to boot on a modchip, use
"makeipl.bat" after building with the CFLAG set to -DMOD. It will create GCOS.GCB, bootable on qoob and possibly
ninjamod. Also, if you build for Qoob, you must set ipl_set_configqoob(6); in main.c and comment out ipl_set_config(6);
which is for the older tmbinc/ninjamod/viper/ripper mods.
//edit2: Ok, dosn't seem to be current... makeipl.bat dosn't exist, even in T3..