Xeno GC not reading my backups

Plastic · Post by **Plastic** » Tue Jun 05, 2012 2:47 am

I am 100% it is installed right, the person who I bought it from is very reputable so there shouldn't any problems there. My media is RITEKG04 01 and I burn all my games at 2x so I have no idea what is wrong.

SouLSLayeR · Post by **SouLSLayeR** » Tue Jun 05, 2012 4:14 am

Do the leds light up?
Pressing start while booting takes you to the shell?
Did you adjust the pot?

Describe what happens step by step.

YouTube · Post by **emu_kidid** » Tue Jun 05, 2012 5:01 am

Try booting an original and hold down the start button the whole way, until the game is loaded. If a shell boots up then the XenoGC is working and you'll need to adjust your laser pot or clean the lens.

Plastic · Post by **Plastic** » Tue Jun 05, 2012 8:02 pm

Yeah, It boots up the shell but I can't see it since I don't have a PAL TV.

SouLSLayeR · Post by **SouLSLayeR** » Tue Jun 05, 2012 8:24 pm

Then it's the pot.
Just google around and you'll find tuts...
like this one http://128bit.me/index.php?topic=26113.0

Just to be sure, clean the lens very carefully with a q-tip and some alcohol, and try a backup again.
Messing with the laser's power isn't that dangerous, but doing what we can to help it a bit doesn't hurt, and prolongs its life too.

Xeno GC not reading my backups

Xeno GC not reading my backups

Re: Xeno GC not reading my backups

Re: Xeno GC not reading my backups

Re: Xeno GC not reading my backups

Re: Xeno GC not reading my backups