Hi. Have you managed to make it fit on a 128k viper?
Viper GC
Re: Viper GC
Not yet and not without cutting it down severely (removing video calls).
dolxz appears to require a change in order to make it work properly from a cold boot on ViperGC too so that's not an option either.
dolxz appears to require a change in order to make it work properly from a cold boot on ViperGC too so that's not an option either.
Re: Viper GC
By removing the video calls means no image until swiss boots? That would not be a problem. At least not in my case.
Removing slot A and B won't reduce the size, correct?
Removing slot A and B won't reduce the size, correct?
Re: Viper GC
If you ever go for it @emu_kidid then I can test sub 128kB versions for both Viper GC and Qoob SX.
Re: Viper GC
Why some dol's say can't run high mem dol files from flash memory?!
Re: Viper GC
Because the Cobra BIOS doesn't let you overwrite where its own code is running from (and it runs from 0x81700000). Swiss and other loaders relocate a stub and use ARAM to work around this.
If you use dollz or dolxz you can relocate the DOL and that might work.
If you use dollz or dolxz you can relocate the DOL and that might work.
Re: Viper GC
Hey guys, i was able to check the usb adapter from my Viper again and a friend of mine connected the usb adapter to a logic analyzer.
He found out the pin 1 have no voltage and no tx/rx signals on pin2/3 of the flat flex.
Now comes the important part! If i could get the configuration files/data from the fpga on the usb adapter i am able to reflash the fpga again. So if you have them, you are a viper gc dev or can organize them I would appreciate that. please contact me if you can help me out to get my USB adapter back on working. Feel free to contact me.
Thanks in advance
He found out the pin 1 have no voltage and no tx/rx signals on pin2/3 of the flat flex.
Now comes the important part! If i could get the configuration files/data from the fpga on the usb adapter i am able to reflash the fpga again. So if you have them, you are a viper gc dev or can organize them I would appreciate that. please contact me if you can help me out to get my USB adapter back on working. Feel free to contact me.
Thanks in advance
- RazorX2014
- Posts: 174
- Joined: Sun Feb 23, 2014 6:50 pm
Re: Viper GC
for anyone who wants to make a jewel for this modchip i made this
the actual png to download below is 3660x3660 with a transparent background.
the actual png to download below is 3660x3660 with a transparent background.
Last edited by RazorX2014 on Tue Mar 26, 2024 10:04 pm, edited 2 times in total.
Re: Viper GC
If anyone is willing to sell me a spare Viper GC Extreme programmer and the ribbon cable for it, I would appreciate it.
- RazorX2014
- Posts: 174
- Joined: Sun Feb 23, 2014 6:50 pm
Re: Viper GC
updated the link to my viper gc iso that contains the bios files, cheats, themes, manuals and software etc.
https://www.gc-forever.com/forums/viewt ... 251#p38251
the iso content can be read and used directly from the cobra bios menu
https://www.gc-forever.com/forums/viewt ... 251#p38251
the iso content can be read and used directly from the cobra bios menu
Re: Viper GC
Hello all,
Recently got a viper GC and need some help.
The cobra bios was running v1.2 and i wanted to update it to 2.1 with ipl patch, so swiss could boot from SD.
Here a user called kiwoore gives details on how to do it with a download of the iso they used (google translate was needed)
https://www-elotrolado-net.translate.go ... _tr_pto=sc
So i downloaded the ISO and have just finally got a disc to boot from multiple burns on multiple writers.
There where 4 options in the menu -
cobra21.vgc
cobra21_drive20010608.vgc
cobra21_drive20020402.vgc
cobra21_drive20020823.vgc
And i used the bottom one which matched my drive date, the flash seems to have worked but...
note. After flashing the GameCube no longer reads the DVD I just used to flash the bios ?
Finally here's my question and where i need help, I was expecting to be able to boot swiss via SD after flashing,
so i renamed swisscompressed.dol to ipl.dol and copied it to my SD card but nothing happens and cobra doesn't do anything ?
Can anyone help, or explain what I have done wrong please.
Recently got a viper GC and need some help.
The cobra bios was running v1.2 and i wanted to update it to 2.1 with ipl patch, so swiss could boot from SD.
Here a user called kiwoore gives details on how to do it with a download of the iso they used (google translate was needed)
https://www-elotrolado-net.translate.go ... _tr_pto=sc
So i downloaded the ISO and have just finally got a disc to boot from multiple burns on multiple writers.
There where 4 options in the menu -
cobra21.vgc
cobra21_drive20010608.vgc
cobra21_drive20020402.vgc
cobra21_drive20020823.vgc
And i used the bottom one which matched my drive date, the flash seems to have worked but...
note. After flashing the GameCube no longer reads the DVD I just used to flash the bios ?
Finally here's my question and where i need help, I was expecting to be able to boot swiss via SD after flashing,
so i renamed swisscompressed.dol to ipl.dol and copied it to my SD card but nothing happens and cobra doesn't do anything ?
Can anyone help, or explain what I have done wrong please.
Re: Viper GC
Those drive date versions of the Cobra BIOS are for alternative drive patches to be used within the Cobra BIOS, I don't think I've personally ever tried them. It's likely the reason why it's no longer reading DVD's sadly.
What you should do is remove the ViperGC at this point and put it aside. Look into getting picoboot installed instead.
What you were trying to do and get Swiss to boot via ipl.dol was install IPLBoot, but as far as I know, there's no IPLBoot version that fits on a regular ViperGC.
What you should do is remove the ViperGC at this point and put it aside. Look into getting picoboot installed instead.
What you were trying to do and get Swiss to boot via ipl.dol was install IPLBoot, but as far as I know, there's no IPLBoot version that fits on a regular ViperGC.
Re: Viper GC
ViperGC can be flashed with iplboot r5.2 but it doesn't support SD2SP2. There is r8 prerelease that supposedly is compatible with ViperGC and has SD2SP2 support but I haven't tested this revision. I'd personally keep ViperGC as a collector item or sell it (it has suprisingly high value) and just move to PicoBoot.
Re: Viper GC
Thanks for the help guys,
Just to note, although I couldn't load the disc that was used to flash the bios originally , other discs which previously failed seemed to work ?
So it seems that flashing the bios with the new cobra 2.1 bios changed something on how it reads or supports disc media (or at least that's what i think happened).
So using a previously burned disc, I flashed the viper again this time with the top option " cobra21.vgc " (would have been really helpful if this was named IPL or something),
And now finally success - IPLBOOT (r5.2) is loading swiss from and SD card in mem card slot 2 (certain DISCS still work but the original one i used still does not).
But now I have more questions -
1, Is there a way back to viper bios ? because I would like to flash IPLBOOT (r8) so SD2SP2 can be used to boot swiss.
For instance is there a viper dol (any version i suppose) that can be booted from swiss then from the viper menu flash viper 2.1 from DVD ?
Or does anyone know of any other way to flash an updated version of IPLBOOT ? (I do not have the USB programmer).
And a couple of insignificant questions -
2, Can't seem to get back to the original bios without removing the SD card in slot 2 (tried holding D-PAD LEFT with no joy and tried holding reset also no joy) any ideas ?
3, Also when swiss is loading an option pops up saying hold B to disable DVD, is there any way to stop that from popping up ?
Just to note, although I couldn't load the disc that was used to flash the bios originally , other discs which previously failed seemed to work ?
So it seems that flashing the bios with the new cobra 2.1 bios changed something on how it reads or supports disc media (or at least that's what i think happened).
So using a previously burned disc, I flashed the viper again this time with the top option " cobra21.vgc " (would have been really helpful if this was named IPL or something),
And now finally success - IPLBOOT (r5.2) is loading swiss from and SD card in mem card slot 2 (certain DISCS still work but the original one i used still does not).
But now I have more questions -
1, Is there a way back to viper bios ? because I would like to flash IPLBOOT (r8) so SD2SP2 can be used to boot swiss.
For instance is there a viper dol (any version i suppose) that can be booted from swiss then from the viper menu flash viper 2.1 from DVD ?
Or does anyone know of any other way to flash an updated version of IPLBOOT ? (I do not have the USB programmer).
And a couple of insignificant questions -
2, Can't seem to get back to the original bios without removing the SD card in slot 2 (tried holding D-PAD LEFT with no joy and tried holding reset also no joy) any ideas ?
3, Also when swiss is loading an option pops up saying hold B to disable DVD, is there any way to stop that from popping up ?
Re: Viper GC
1. I think the only option now is to use external programmer. I've tried to conver VGC bios to DOL but my attempts were unsuccessful.
2. It's not supported in r5.2, the only option is to remove adapter or SD card.
3. I think there was an option to do it but can't confirm at the moment.
2. It's not supported in r5.2, the only option is to remove adapter or SD card.
3. I think there was an option to do it but can't confirm at the moment.
Re: Viper GC
Thanks for the info webhdx,
Well its a shame there's no other method to revert back to an original bios.
so for now I am happy, the GameCube works fine and boots to swiss (with the SD in slot 2).
I will keep looking around for a solution to flashing the bios, but damn i really wanted to test IPLBOOT r8 with SD2SP2.
Well its a shame there's no other method to revert back to an original bios.
so for now I am happy, the GameCube works fine and boots to swiss (with the SD in slot 2).
I will keep looking around for a solution to flashing the bios, but damn i really wanted to test IPLBOOT r8 with SD2SP2.
Re: Viper GC
So i have managed to get a programmer (which I didn't think I would find) although it is untested.
Only problem is it doesn't come with a FCC cable, so I need a little help on which one to buy ?
Could anyone share these details on the ribbon please -
1, how many pins
2, pitch (0.5mm or 1mm)
3, direction (forward or reverse)
4, approximate length
Only problem is it doesn't come with a FCC cable, so I need a little help on which one to buy ?
Could anyone share these details on the ribbon please -
1, how many pins
2, pitch (0.5mm or 1mm)
3, direction (forward or reverse)
4, approximate length
Re: Viper GC
1. 14kup11 wrote: ↑Thu May 11, 2023 8:36 amSo i have managed to get a programmer (which I didn't think I would find) although it is untested.
Only problem is it doesn't come with a FCC cable, so I need a little help on which one to buy ?
Could anyone share these details on the ribbon please -
1, how many pins
2, pitch (0.5mm or 1mm)
3, direction (forward or reverse)
4, approximate length
2. 0.5mm? (see picture)
3. Forward (same side)
4. exactly 220mm
Last edited by Cornholio on Fri Oct 20, 2023 7:59 pm, edited 2 times in total.
Re: Viper GC
Those are not 0.5mm pitch, unless the ruler isn't of the metric kind!
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
- RazorX2014
- Posts: 174
- Joined: Sun Feb 23, 2014 6:50 pm
Re: Viper GC
i have the full setup, i will replace the battery in my calipers tomorrow and measure the pitch
- RazorX2014
- Posts: 174
- Joined: Sun Feb 23, 2014 6:50 pm
Re: Viper GC
it was quite tricky given the size but i'm getting 14pin 0.35mm pitch but it looks like 0.5mm would work and that's a standard pitch so i'd try that.
without opening the console i'd estimate the cable is about 25cm long.
for me in the uk, this seems like it would be a good replacement:
https://www.ebay.co.uk/itm/173080054798 ... 6oQAvD_BwE
without opening the console i'd estimate the cable is about 25cm long.
for me in the uk, this seems like it would be a good replacement:
https://www.ebay.co.uk/itm/173080054798 ... 6oQAvD_BwE
Re: Viper GC
Hi guys.
Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss.
Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success
seeing these steps:
(Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”.
Make sure that cobra21.vgc is 81920 bytes long before the copy operation.)
The flashing seems ok, but when i turn on the gamecube, it loads the original bios.
Can someone help me,please?
Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss.
Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success
seeing these steps:
(Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”.
Make sure that cobra21.vgc is 81920 bytes long before the copy operation.)
The flashing seems ok, but when i turn on the gamecube, it loads the original bios.
Can someone help me,please?
- RazorX2014
- Posts: 174
- Joined: Sun Feb 23, 2014 6:50 pm
Re: Viper GC
there is also software you can use, like this:Antares wrote: ↑Wed Mar 27, 2024 5:52 pmHi guys.
Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss.
Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success
seeing these steps:
(Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”.
Make sure that cobra21.vgc is 81920 bytes long before the copy operation.)
The flashing seems ok, but when i turn on the gamecube, it loads the original bios.
Can someone help me,please?
in the swiss zip you want to use the one under 'DOL\Viper', the latest verison is 'swiss_r1622-lz-viper.dol' but i highly recommend you just flash the viper extreme modchip with iplboot like i did and that will boot swiss directly from something like the sd2sp2 when named ipl.dol.
that way it's super easy to keep it upto date.
Re: Viper GC
ive sd2sp2.RazorX2014 wrote: ↑Wed Mar 27, 2024 6:46 pmthere is also software you can use, like this:Antares wrote: ↑Wed Mar 27, 2024 5:52 pmHi guys.
Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss.
Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success
seeing these steps:
(Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”.
Make sure that cobra21.vgc is 81920 bytes long before the copy operation.)
The flashing seems ok, but when i turn on the gamecube, it loads the original bios.
Can someone help me,please?
in the swiss zip you want to use the one under 'DOL\Viper', the latest verison is 'swiss_r1622-lz-viper.dol' but i highly recommend you just flash the viper extreme modchip with iplboot like i did and that will boot swiss directly from something like the sd2sp2 when named ipl.dol.
that way it's super easy to keep it upto date.
So i put "swiss_r1622-lz-viper.dol" naming as "ipl.dol".
But where do i find the right IPLBOOT for my EUR Gamecube 001?