Wiikey Fusion - Red Light?

Jexion · Post by **Jexion** » Wed Oct 17, 2012 12:42 pm

Ok guys, i finally got my wiikey fusion cable (thanks _nold_!)
I hooked everything up, checked the dip switches and i get a red light on wiikey fusion board as well as a warning on the screen telling me to power down and refer to my user manual.

Has anyone come across this problem before? and what should be my next course of action to fix it?

megalomaniac · Post by **megalomaniac** » Wed Oct 17, 2012 1:13 pm

check continuity, check switch functionality, check voltage level to wkf

Jexion · Post by **Jexion** » Wed Oct 17, 2012 7:38 pm

sorry megalo, im kind of new to this. Could you elaborate?

megalomaniac · Post by **megalomaniac** » Wed Oct 17, 2012 8:13 pm

do you have a multimeter?

Jexion · Post by **Jexion** » Wed Oct 17, 2012 8:55 pm

yes, i bought it last weekend but i havent used it as yet

megalomaniac · Post by **megalomaniac** » Wed Oct 17, 2012 9:22 pm

read this, play with your multimeter as shown in the examples...
then apply the methods to check your connections...

http://learn.adafruit.com/multimeters/

YouTube · Post by **emu_kidid** » Thu Oct 18, 2012 12:11 am

Red light usually means something is going wrong, i.e. not enough power or no power at certain pins, or the eject/switch. Double check all connections visually and with a multimeter I guess - also ask Nold if he'd tested it prior to sending (pretty sure he would have though).

Are you putting it the right way in the slot?

Wiikey Fusion - Red Light?

Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?

Re: Wiikey Fusion - Red Light?