SunDriver IDE ATA

ViperGC/Qoob/etc
Post Reply
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

SunDriver IDE ATA

Post by Lupin3rd » Mon Aug 25, 2014 1:17 pm

I just found the SunDriver IDE ATA at a ridiculous price (7.90€): http://www.siliteo.fr/sundriver-ide-ata ... ement.html
Maybe it is can be a good alternative as drive replacement.

I'm wondering if the Sundriver can be handled by Swiss or there are any technical limitation.
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: SunDriver IDE ATA

Post by emu_kidid » Mon Aug 25, 2014 11:00 pm

Sure, it could be handled by Swiss if it can boot to the menu at least through the real GC menu. Then it'd just need me to buy one and implement it into Swiss. Anyone feel like trying to buy one and then letting me know if it's actually legit from there?
Image
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Tue Aug 26, 2014 7:34 am

I think I will give it a try.

EDIT: I just ordered two. I will keep you guys updated.
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

Re: SunDriver IDE ATA

Post by Lupin3rd » Tue Aug 26, 2014 7:53 am

I also ordered two of them, I expect to receive them by tomorrow.
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

Re: SunDriver IDE ATA

Post by Lupin3rd » Wed Aug 27, 2014 7:55 am

I got the boards ;-)
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Wed Aug 27, 2014 8:23 am

Nice! Does the Menu load on GameCube?
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

Re: SunDriver IDE ATA

Post by Lupin3rd » Wed Aug 27, 2014 8:29 am

I need to order a cable for powering up the board :( (http://save-mii.com/ten/product/11/123/ ... Cable.html)

I'm not sure which FW is preinstalled, so I'm think to order also a Nero Dual programmer (http://save-mii.com/ten/product/11/261/ ... -Dual.html)

Do you know if the Injectus (http://save-mii.com/ten/product/11/1527 ... ammer.html) can be used with this board?
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Wed Aug 27, 2014 9:07 am

No, I have no idea :/

I saw, that you can update the (GameCube based) menu without the programmer, so I just hope, that the preinstalled firmware is okay.

Also: Which version did you get? The screenshots show both versions :D But I think this is the IDE + CF version, right?
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

Re: SunDriver IDE ATA

Post by Lupin3rd » Wed Aug 27, 2014 9:29 am

I received the IDE + CF.
For the moment I can connect the power of the sundriver to the wii... I will check this evening :)
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Fri Aug 29, 2014 9:15 am

So, did it work somehow? ^^
Lupin3rd
Posts: 17
Joined: Sun Aug 18, 2013 10:31 pm

Re: SunDriver IDE ATA

Post by Lupin3rd » Fri Aug 29, 2014 10:03 am

No time to play with it...
I need to postpone for now :cry:
Benni
Posts: 259
Joined: Mon Oct 17, 2011 7:45 am

Re: SunDriver IDE ATA

Post by Benni » Fri Aug 29, 2014 9:39 pm

i bought some,too...

and now i found out, that there is a sata Version,too....
is there an Adapter from 2,5" ide to sata?
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Sat Aug 30, 2014 7:34 am

If this is working, my plan is to buy a 128GB compact flash card. Doesn't need extra power and 128GB seem to be enough for most good and okay games on the GameCube ^^
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: SunDriver IDE ATA

Post by tueidj » Sat Aug 30, 2014 8:03 am

badsector wrote:If this is working, my plan is to buy a 128GB compact flash card. Doesn't need extra power and 128GB seem to be enough for most good and okay games on the GameCube ^^
Good luck with that, the cheap ones start at $200 (anything less will be fake) and the decent ones start at $500.
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Sat Aug 30, 2014 8:07 am

There are 128GB cards for 80€. I don't think that I will need a high speed card.

http://www.amazon.de/Komputerbay-128GB- ... rds=cf+128

Reviews are decent, 4/5 stars.
Last edited by badsector on Sat Aug 30, 2014 8:15 am, edited 1 time in total.
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: SunDriver IDE ATA

Post by tueidj » Sat Aug 30, 2014 8:14 am

Almost guaranteed to be fake for that price.
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Sat Aug 30, 2014 8:15 am

Take a look at the link that I just updated.

They seem to be lexar cards, that did not hit the high quality standards. If the card does not work, I send it back to amazon.
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: SunDriver IDE ATA

Post by tueidj » Sat Aug 30, 2014 8:36 am

If you check the reviews, they're all basically split into two categories:
- good reviews: people saying it works with their camera and can hold 1000s of photos (duh, so can an 8GB card).
- bad reviews: people saying the cards initially worked but either randomly failed later or during formatting, then became unrecognized/unusable. This is a sure sign of a card overflowing its physical capacity and trashing parts of the NAND that are meant to hold configuration/mapping data.
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Sat Aug 30, 2014 8:51 am

But on the other hand, you don't put data onto the card every day, when using inside of a GameCube. Most of the time you are just reading data. But maybe you are right. In this case, I will try using an extension/adapter to put a CF slot on the outside of the Cube and use smaller and better CF cards.

http://www.misco.co.uk/product/138599/S ... -Converter
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: SunDriver IDE ATA

Post by tueidj » Sat Aug 30, 2014 9:03 am

It wouldn't matter how often the card was written to, it would fail as soon as you try to write beyond the real capacity of the flash memory (which is probably something like 8 or 16GB).
You can get SD<->Compact Flash adapters, performance is a lot worse than using native CF but SD cards are a hell of a lot cheaper.
User avatar
badsector
Posts: 202
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: SunDriver IDE ATA

Post by badsector » Sat Aug 30, 2014 9:31 am

Thanks for all your input! I will consider how to use the Sundriver as soon as we know if it works :D
BenoitRen
Posts: 263
Joined: Sun Jul 29, 2012 3:37 pm

Re: SunDriver IDE ATA

Post by BenoitRen » Sat Aug 30, 2014 5:46 pm

badsector wrote:They seem to be lexar cards, that did not hit the high quality standards.
Last I heard Lexar wasn't that good of a brand to start with. At least not for PSP memory sticks.
Hardware: Wii (PAL)
Hardware configuration: System Menu 4.1E, Priiloader
Swiss boot method: Modified Wii Swiss Booter provided by Extrems
Software medium: Retail discs
Post Reply