WASP 3 won't load WBFS cards, mouting problem, int wiikey problem
Posted: Tue Aug 11, 2015 11:42 pm
Hi!
I have three WASP 3, two i've bought from maciek_1988 user, one from http://www.badassconsoles.com site.
1. Mouting problem on WASP 1.4
WASPs 3 from maciek_1988 (he distribute WASPs in Poland by http://www.allegro.pl)
There is two chips, with 1.4 firmware. The problem is, they want not load any sd card. I use WBFS 4.0 to format SDs, and put on the SD some ISOs. I make this SD as is writen in Wiikey Fusion Updating Firmware guide.
http://www.eurasia.nu/mirrors/wiikey_fu ... dates.html. I have also one original Wiikey Fusion, and this method works on it. (I have finished making my WKF GameCube, so i have a little knowledge about WKF). There is also other problem, these Wasps behave strange. If i would like to enter in WASP menu. First I must to make sure the SD isn't plugged in into WASP, then I can turn on Gamecube, when red light appears on WASP, then i must lock the Pin 29 switch, and then WASP boot correctly. If SD card is plugged in into WASP, or Pin 29 switch is locked before turning on Gamecube, blue light lit, and the Gamecube' screen is freeze. I write this because I'm not sure is it normal behave of WASP chips. (WKF boot normal with SD card and with locked Pin 29). So, whatever SD format in WBFS file system I plug in into these WASPs, and WASPs says: Mouting...
Every time both WASP says: Mouting...
So nothing can't be do on these WASP (patching, loading, ect.)
I tried difrent SD cards, 2GB, 8GB HC, nothing works! I read also similar problem to mine :viewtopic.php?f=16&t=2893&hilit=wbfs . I hope that my wasp isn't broken, like WASP in this topic.
Probably WKF 1.2 restore ISO for this problem will help.
2. Init WASP on Swiss problem
WASP 3 form http://www.badassconsoles.com (from Megalomaniac)
This WASP has Swiss 0.3 firmware, when I turn on Gamecube, Swiss boot and it says: Init Wiikey Fusion, and blue light lit, and the screen is freezed, or appears WKF/WASP switch error, and here also screen is freezed. So, it is impossible to use or open the SD card directory. I can't even restore WKF firmware. How to fix this problem? My last gamecube which i've made, was on WKF with Swiss autoboot, and this problem doesn't appear. Since i have WASP there are problems with them.
Every of these all three WASPs i've tested on two PAL motherboards (IPL 1.0)
Now i'm really embarrassed with these WASPs, and i'd like to know how to fix them, or are they broken?
Please help me, and thank You for any hint and reply.
P.s. Sorry for english.
I have three WASP 3, two i've bought from maciek_1988 user, one from http://www.badassconsoles.com site.
1. Mouting problem on WASP 1.4
WASPs 3 from maciek_1988 (he distribute WASPs in Poland by http://www.allegro.pl)
There is two chips, with 1.4 firmware. The problem is, they want not load any sd card. I use WBFS 4.0 to format SDs, and put on the SD some ISOs. I make this SD as is writen in Wiikey Fusion Updating Firmware guide.
http://www.eurasia.nu/mirrors/wiikey_fu ... dates.html. I have also one original Wiikey Fusion, and this method works on it. (I have finished making my WKF GameCube, so i have a little knowledge about WKF). There is also other problem, these Wasps behave strange. If i would like to enter in WASP menu. First I must to make sure the SD isn't plugged in into WASP, then I can turn on Gamecube, when red light appears on WASP, then i must lock the Pin 29 switch, and then WASP boot correctly. If SD card is plugged in into WASP, or Pin 29 switch is locked before turning on Gamecube, blue light lit, and the Gamecube' screen is freeze. I write this because I'm not sure is it normal behave of WASP chips. (WKF boot normal with SD card and with locked Pin 29). So, whatever SD format in WBFS file system I plug in into these WASPs, and WASPs says: Mouting...
Every time both WASP says: Mouting...
So nothing can't be do on these WASP (patching, loading, ect.)
I tried difrent SD cards, 2GB, 8GB HC, nothing works! I read also similar problem to mine :viewtopic.php?f=16&t=2893&hilit=wbfs . I hope that my wasp isn't broken, like WASP in this topic.
Probably WKF 1.2 restore ISO for this problem will help.
2. Init WASP on Swiss problem
WASP 3 form http://www.badassconsoles.com (from Megalomaniac)
This WASP has Swiss 0.3 firmware, when I turn on Gamecube, Swiss boot and it says: Init Wiikey Fusion, and blue light lit, and the screen is freezed, or appears WKF/WASP switch error, and here also screen is freezed. So, it is impossible to use or open the SD card directory. I can't even restore WKF firmware. How to fix this problem? My last gamecube which i've made, was on WKF with Swiss autoboot, and this problem doesn't appear. Since i have WASP there are problems with them.
Every of these all three WASPs i've tested on two PAL motherboards (IPL 1.0)
Now i'm really embarrassed with these WASPs, and i'd like to know how to fix them, or are they broken?
Please help me, and thank You for any hint and reply.
P.s. Sorry for english.