Qoob Pro Won't Load DOL's
Posted: Wed Jan 25, 2017 11:57 pm
Hey Everyone,
I have a Qoob Pro installed on a DOL-001B. Its has hacked bios hw0 sw1.3c. I had a version of swiss written to the flash memory that worked really well.
I just recently erased that unknown version from the chip and flashed Swiss r382 compressed dol to it. I launch the dol from the Qoob Pro menu and then it gets stuck on "running dol."
I have flashed other dols like SDload and mGBA to see if it was just the current Swiss or all dols. None load properly. I have erased and reflashed the bios and backgrounds with no issues. I have no idea what is going on.
I have been flashing with the cracked flash tool on a Win7 run in Win7 mode and WinXP compability mode. Any ideas or insight would be greatly appreciated.
I have a Qoob Pro installed on a DOL-001B. Its has hacked bios hw0 sw1.3c. I had a version of swiss written to the flash memory that worked really well.
I just recently erased that unknown version from the chip and flashed Swiss r382 compressed dol to it. I launch the dol from the Qoob Pro menu and then it gets stuck on "running dol."
I have flashed other dols like SDload and mGBA to see if it was just the current Swiss or all dols. None load properly. I have erased and reflashed the bios and backgrounds with no issues. I have no idea what is going on.
I have been flashing with the cracked flash tool on a Win7 run in Win7 mode and WinXP compability mode. Any ideas or insight would be greatly appreciated.