Unbrick Viper Extreme
Unbrick Viper Extreme
Hello, before all, I want to apologize for my English, I am French and speak very bad English: /
I think I bricked my Viper Extreme by wanting to update the bios from a PC in Windows 10. The USB connection was lost during the update and the console does not even start (Led ok but the fan does not rotate)
Do you know if there is possiblity to unbricked the chip from a PC or some other way?
Thank you in advance for your answers.
I think I bricked my Viper Extreme by wanting to update the bios from a PC in Windows 10. The USB connection was lost during the update and the console does not even start (Led ok but the fan does not rotate)
Do you know if there is possiblity to unbricked the chip from a PC or some other way?
Thank you in advance for your answers.
Re: Unbrick Viper Extreme
If the fan doesn't spin, your problems are bigger than the Viper being bricked. Which LED is turning on?
Re: Unbrick Viper Extreme
Ok, this sounds like a bad flash. Use an older machine (XP or something) to reflash it if you can. I don't really know much about the Viper, I only have a Qoob Pro. You should consider using iplboot in case that wasn't what you were trying to flash to it, I've added Viper support a while ago and it's been tested by someone so it should work.
Re: Unbrick Viper Extreme
Can you try with the parallel flasher?
Re: Unbrick Viper Extreme
No, I can not: / I just have 2 USB flashers, no parallel flashing.
I think I will replace the Viper chip with a XenoGC. Unless the Viper can still be bought?
Anyway, thanks for your help and your time.
I think I will replace the Viper chip with a XenoGC. Unless the Viper can still be bought?
Anyway, thanks for your help and your time.
Re: Unbrick Viper Extreme
You're welcome. Sad that you can't get it to work.
-
- Posts: 1
- Joined: Fri Feb 20, 2015 5:53 pm
Re: Unbrick Viper Extreme
would you sell your Viper ?