WASP Custom from BAC seemingly non-working

ViperGC/Qoob/etc
Post Reply
ReWrite
Posts: 1
Joined: Fri Nov 02, 2018 4:27 pm

WASP Custom from BAC seemingly non-working

Post by ReWrite » Fri Nov 02, 2018 4:38 pm

Hopefully someone here can tell me that I'm the issue and the item is fine!

I bought a WASP back in July, got it in September, tried to install it two weekends back. It does not seem to work. It just boots up to the "An error has occurred. Turn the Power Off and check the Nintendo GameCube Instruction Booklet for further instructions." screen. My gamecube works fine when I replace the original disc drive, and back to the error screen when I put the WASP back in.

I've tried half a dozen different brands of SD card, all formatted properly in FAT32, ranging in sizes from 4GB to 64GB. I've tried each of the four dipswitch settings found in the wiki and they make no difference it seems. I have a US Gamecube with the digital out port.
Post Reply