Viper GC Drive Stop?!?!

[Keiko]

Hi, first sry for my bad English ^^;

i got a Gamecube with Viper GC Original and i have a Problem.....i cant Play 2 Disk Games (Backups) i open the Top for change Disk an the Disk Stop NOT.....how i can change the disk?
Give a secret Button Kombo for Disk Stop? xD

Please Help ^^;

Sry for my English ^^;

[emu_kidid]

In the Cobra BIOS, change the lid sensor option to "pass-through" - Let me know if this works. Second option might be to use Swiss on a DVD with pass-through + original lid switch wire in use.

[Keiko]

Hi thx for Help ^^
I use the Cobra Bios 2.1 an this Option is only for Original Bios, in Original Bios works nice, BUT Original Bios read not Copys ^^;
What u mean with "Swiss on a DVD with pass-through"?
I have burn Swiss r62 on DVD but i can not change a Disk :/

[emu_kidid]

I'll setup my vipergc tonight and try to remember

[kel01]

Just thought I would mention but there is one game (Resident Evil 0) that won't let you change disc on a Viper modchip and maybe other chips also. Even when using an original copy it won't let you change disc unless you run it through the original BIOS. All other 2 disc games should swap fine though as far as I know.

[Keiko]

I test it, the disc stop realy, the gamecube say change disc i open the top, change disc close top, the Gamecube say "read disc...." BUT the drive spin not, i open top Gamecube say "pls close change disc and close top" i close the top, but the Disc spin again not

I test 3 Games with 2 Disk´s but nothing

[infact]

I thought it were not possible to switch a burned disc ingame with viper/cobra, because the drive needs to be patched again after the drive sequence (spin down,reset,startup) and there is no program to do that.

[emu_kidid]

if you can boot swiss as the first thing in the drive then you should be ok since it can patch the drive for 2 disc games to work.