Help

[gcpro]

The first time i tryed to mod my cube with qoob pro, i've connected some wires on GC's board and it screwed my GC, after that i removed the entire solder and it worked again, but withouth sound. can someone help me?

[emu_kidid]

you need to check your connections going to the MX chip, they are most likely shorting someplace.

[gcpro]

Mx Chip? i don't know what is this :S

[emu_kidid]

The black IC (chip) that you solder onto.

[gcpro]

Oh man , i don't soldering that chip, i only soldering the pins, i've connected all pins , and it screwed my GC,after that i removed the entire solder and it worked again, but withouth sound,


Pins


After i've soldered ;/


i have 2 NGC, one is perfect, modded with Qoob pro , the other isn't moded but no have sound '-'


(sorry but i don't speak english very well ;x)

[gcpro]

oh man, i've open the NGC and look for Mx Chip and...not good o.o i will post photos here '-'

[gcpro]

Pins



Mx Chip






Help

[R3dfaction]

Try not to add too much solder in your connections as I see your first attempt a bit messed up, hopefully you haven't damaged the mx-chip when you turned it on the first time...

[gcpro]

oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute

Events

1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images


3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound


I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.

[liquitt]

hopefully you haven't damaged the mx-chip when you turned it on the first time...

he did understand you gcpro and i share his opinion btw

[R3dfaction]

oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute

Events

1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images


3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound


I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.

Does the MX chip have any soldering connected to other legs?

[gcpro]

oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute

Events

1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images


3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound


I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.

Does the MX chip have any soldering connected to other legs?

no, all clean