Page 1 of 1
Help
Posted: Thu Apr 29, 2010 7:52 pm
by gcpro
The first time i tryed to mod my cube with qoob pro, i've connected some wires on GC's board and it screwed my GC, after that i removed the entire solder and it worked again, but withouth sound. can someone help me?
Re: Help
Posted: Thu Apr 29, 2010 10:53 pm
by emu_kidid
you need to check your connections going to the MX chip, they are most likely shorting someplace.
Re: Help
Posted: Fri Apr 30, 2010 3:13 am
by gcpro
Mx Chip? i don't know what is this :S
Re: Help
Posted: Fri Apr 30, 2010 3:46 am
by emu_kidid
The black IC (chip) that you solder onto.
Re: Help
Posted: Fri Apr 30, 2010 5:11 pm
by gcpro
Oh man
, i don't soldering that chip, i only soldering the pins, i've connected all pins
, and it screwed my GC,after that i removed the entire solder and it worked again, but withouth sound,
Pins
After i've soldered ;/
i have 2 NGC, one is perfect, modded with Qoob pro
, the other isn't moded but no have sound '-'
(sorry but i don't speak english very well ;x)
Re: Help
Posted: Fri Apr 30, 2010 5:32 pm
by gcpro
oh man, i've open the NGC and look for Mx Chip and...not good o.o i will post photos here '-'
Re: Help
Posted: Sat May 01, 2010 4:45 pm
by gcpro
Re: Help
Posted: Sat May 01, 2010 7:23 pm
by R3dfaction
Try not to add too much solder in your connections as I see your first attempt a bit messed up, hopefully you haven't damaged the mx-chip when you turned it on the first time...
Re: Help
Posted: Sat May 01, 2010 8:53 pm
by gcpro
oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute
Events
1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images
3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound
I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.
Re: Help
Posted: Sat May 01, 2010 9:55 pm
by liquitt
R3dfaction wrote:
hopefully you haven't damaged the mx-chip when you turned it on the first time...
he did understand you gcpro and i share his opinion btw
Re: Help
Posted: Sat May 01, 2010 11:26 pm
by R3dfaction
gcpro wrote:oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute
Events
1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images
3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound
I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.
Does the MX chip have any soldering connected to other legs?
Re: Help
Posted: Tue May 04, 2010 5:04 pm
by gcpro
R3dfaction wrote:gcpro wrote:oh, no no no, you don't understand me =/, actually, the gamecube is not mod with qoob pro, i removed it and the gamecube was mute
Events
1 - I soldered the chip
2 - I soldered pins wrong as you can see in the images
3 - Gamecube stopped working
4 - I removed the chip
5 - Gamecube returned to work, but got no sound
I have another gamecube modified with Qoob PRO, this is working perfectly, after the firstNGC had a problem I've learned to fix many problems, but this problem of the sound seems to be impossible.
Does the MX chip have any soldering connected to other legs?
no, all clean