My Qoob is acting up.

Air Conditioner · Post by **Air Conditioner** » Sun Apr 08, 2012 4:24 pm

So recently whenever I solder up my qoob pro and turn everything on, there is no video output the only thing showing me that my qoob still even works is the green indicator LED is on. I'm 99% sure that my qoob is what's causing this because when I have it de-soldered my GC runs as normal and everything goes fine. Any suggestions as to what I should do? And it started when I tried to load swiss rev 124 (viper) onto the flash memory like emu_kidid told me to try because swiss-lz isn't currently working.

_Nold_ · Post by **_Nold_** » Sun Apr 08, 2012 4:34 pm

Did you flash the qoob with a firmware? I had the same problem and as i connected it to the pc i saw that there was no firmware flashed to the chip...

Air Conditioner · Post by **Air Conditioner** » Sun Apr 08, 2012 4:41 pm

Are you speaking of the BIOS? If so then yes. I have tried re-flashing it several times.

YouTube · Post by **emu_kidid** » Mon Apr 09, 2012 12:58 am

does the Qoob bios boot up? If so, then there's nothing wrong with the chip, I'll just need to fix swiss.

Air Conditioner · Post by **Air Conditioner** » Mon Apr 09, 2012 1:19 am

No the BOIS dosnt boot up. There is no video at all.

Dragoon · Post by **Dragoon** » Tue Apr 10, 2012 8:07 am

Mizumi wrote:And it started when I tried to load swiss rev 124 (viper) onto the flash memory like emu_kidid told me to try because swiss-lz isn't currently working.

I think that's ur problem, eventhough emu_kidid said it, he could have a lack of caffeine/nicotine/alcohol when he said that
Anyway try flashing it with the latest qoob bios, maybe that will work.

My Qoob is acting up.

My Qoob is acting up.

Re: My Qoob is acting up.

Re: My Qoob is acting up.

Re: My Qoob is acting up.

Re: My Qoob is acting up.

Re: My Qoob is acting up.