Game Boy Interface

[DorDur215]

Hello I've been trying to configure GBI SR to my liking but I can't seem to get my desired results.

I'm trying to get GBI SR working in as close to fullscreen and correct aspect ratio on my Samsung 4k TV (2021) with a GCVideo-DVI 3.1 HDMI Adapter.

I've tried the gbihf-gcdv-v3 preset but my tv doesn't seem to to be able to display 720×960i so I need settings that work in 480p.

I've also tried the following settings from the wiki:

--zoom=2.53125:3
--format=custom,offset=0,scaled-size=0:0
--scan-mode=progressive

And while those settings seemed to be fullscreen at first I later noticed that it cuts off a bit of the image at the top and bottom.

So my question is is there any way that I could get 16:9 as close to fullscreen as possible on GBI SR?

It's the TV that's cutting off the picture. Simply scale the zoom factor to compensate. (example: --zoom=2.3203125:2.75)

Thanks a lot! That did the trick!

[DorDur215]

Hello it's me again.

I'm having another issue.

I'd like to get GBI SR to display 3x zoomed 4:3 specifically for GB/GBC but the aspect ratio seems to be off.

I tried the following settings that the wiki mentioned:

--zoom=3
--vfilter=.5:.25:.25
--scan-mode=interlace

--zoom=3
--vfilter=.5:.5:.0:.5:.0:.5
--scan-mode=non-interlace

--zoom=3
--scan-mode=progressive

I am using a GCVideo HDMI Adapter.

Help would be greatly appreciated!

Edit: I found a solution. I just had to disable the "Resolution Fix" setting in my GCVideo HDMI Adapter! Now the aspect ratio is correct.

[DorDur215]

Hello again!

I'm extremely sorry and I really don't wanna bother anyone but I have an issue.

The problem is that I get what seems like stuttering for 5 seconds in very consistent intervals (something like every 20-30 minutes, I haven't timed it tho).

The stuttering happens in all games I've tried (Kirby Amazing Mirror, Rhythm Tengoku, Pokemon Emerald) in seemingly random places but in consistent intervals as mentioned above.

I am using GBISR with a GCVideo 3.1 HDMI adapter on a 2021 Samsung 4k tv.

My GBISR DOL+CLI is using these settings:

--zoom=2
--no-overlay
--scaler=nearest
--profile=srgb
--volume=0.5
--sound=digital
--format=custom,offset=0,scaled-size=0:0
--scan-mode=progressive
--no-enhance

Could the fact that I'm using GBISR on a modern tv be the issue because of the weird gba refresh rate?

[Extrems]

Nah, it's a problem most commonly seen with --format=custom where the Game Boy Player's VSync is straddling the GameCube's VSync line when the clock phase is just right.

[DorDur215]

Nah, it's a problem most commonly seen with --format=custom where the Game Boy Player's VSync is straddling the GameCube's VSync line when the clock phase is just right.

Thanks for your reply!

So to be clear this issue is not fixable?

If so is there any other format I can use that works for modern displays that doesn't have this issue?

[Extrems]

I wouldn't say it's impossible to fix, but it's difficult to fix.

[DorDur215]

I wouldn't say it's impossible to fix, but it's difficult to fix.

Well thankfully it's not that big of an issue.

I'm sure you're busy enough already but it would be nice if it could be fixed someday.

[CYAN1DE7]

Hello all, I'm having trouble getting the frame overlay working.

In my gbi.cli file I have added these lines to my working .cli:

--overlay=frame-srgb.tpl.gz
--overlay-id=11

Now having these lines in I also have the folder: frame-srgb and the file frame-srgb.tpl.gz in my GBI folder which is in the root of my SD card. I use swiss to boot up GBI.

Please let me know how I can activate this overlay, I'd greatly appreciate it!

[fvig2001]

I have a question on the rumble feature.

Steps:

1. Power on GBA without cart
2. Connect Gamecube to GBA running GBI
3. Attach compatible cart on GBA "controller"
4. Load up a game like Drill Dozer in Gamecube

Is this correct?

Has anyone tried Wario Wario Twisted's Japanese version? I ordered one in hopes it would work.

Thank you

[Extrems]

You need to power on the GBA with the cart. Press Start + Select to cancel cart boot.

[Cristan]

Hello everyone,

It is the first time that I am going to use the Game Boy Interface and I have seen that there are different versions.

I wonder, what is the best version or configuration to play on a CRT monitor?

Thank you

[liquitt]

The standard edition is ideal for sample-and-hold displays (LCD, OLED). By default, it emulates some aspects of the color and sound reproduction of the original handheld. With a Broadband Adapter and USB Gecko in hand, it can be used as a small Game Boy Advance development kit.

The speedrunning edition is ideal for impulse displays (CRT, 1ms MPRT LCD, Plasma) or use with the RetroTINK-2X. It attempts to be a non-controversial improvement for speedrunners. To ease transition, it can be configured to closely mimic the Game Boy Player Start-up Disc.

You're welcome.

Source: https://www.gc-forever.com/wiki/index.p ... _Interface

[Cristan]

The standard edition is ideal for sample-and-hold displays (LCD, OLED). By default, it emulates some aspects of the color and sound reproduction of the original handheld. With a Broadband Adapter and USB Gecko in hand, it can be used as a small Game Boy Advance development kit.

The speedrunning edition is ideal for impulse displays (CRT, 1ms MPRT LCD, Plasma) or use with the RetroTINK-2X. It attempts to be a non-controversial improvement for speedrunners. To ease transition, it can be configured to closely mimic the Game Boy Player Start-up Disc.

You're welcome.

Source: https://www.gc-forever.com/wiki/index.p ... _Interface

Thanks, I'll try that way

[Clarar]

I assume the arguments would allow me to start it in 240p, but I have no idea where I can enter them. Is there an option for it in Swiss?

Set Swiss Video Mode to 480i. The only loader that supports arguments on GameCube is GBI itself through wiiload, using a Broadband Adapter.

Hi friend
Setting Swiss Video Mode to 480i allows for optimal visual experience on GameCube. GBI, through wiiload and the Broadband Adapter, provides the capability to load and configure this mode efficiently

[Nofii]

The problem is that I get what seems like stuttering for 5 seconds in very consistent intervals (something like every 20-30 minutes, I haven't timed it tho).

The stuttering happens in all games I've tried (Kirby Amazing Mirror, Rhythm Tengoku, Pokemon Emerald) in seemingly random places but in consistent intervals as mentioned above.

I am using GBISR with a GCVideo 3.1 HDMI adapter on a 2021 Samsung 4k tv.bitlife

My GBISR DOL+CLI is using these settings:

--zoom=2
--no-overlay
--scaler=nearest
--profile=srgb
--volume=0.5
--sound=digital
--format=custom,offset=0,scaled-size=0:0
--scan-mode=progressive
--no-enhance

Could the fact that I'm using GBISR on a modern tv be the issue because of the weird gba refresh rate?

Hii, i am having the same issue. I read the thread, the cause of the issue is mentioned and this issue left unsolved.
Can anyone tell me how can i solve it?

[MR.JOE]

Hi I'm looking at setting up GBIHF 360p through an RT5X and noted the following line in the firmware update:

The RGB approach seems to have some image quality issues, though, so we'd recommend a solution that uses the GC's digital AV port.

Is anyone able to explain what kind of quality issues in laymans terms?

It's a little over twice the cost for the carby/hdmi>component converters so curious how bad the SCART solution is in comparison

Any updates on this? I would like to know if it's possible to get 360p through RGB scart and in case how to set it up.