gbiloader (automatic Game Boy Interface loader with .cli config file support)
Posted: Fri Jun 30, 2017 1:42 am
gbiloader is a GameCube bootloader targeting Game Boy Interface. It allows you to automatically start GBI with a custom configuration (via *.cli files) when you turn your GameCube on, and to use an optional menu (hold down "Y" when gbiloader is starting) to change which version of GBI should be loaded by default (GBI/GBI-LL/GBI-ULL/Swiss). This is useful because Swiss only supports *.cli files when you manually load a DOL, it does not support *.cli files for boot.dol.
The latest release of gbiloader is available on GitHub: https://github.com/Guspaz/gbiloader/releases
Instructions on how to set it up and use it can be found in the README.md file in the release zip, and also on the front page of the github repository here: https://github.com/Guspaz/gbiloader
Here's the changelog, which I'll keep up to date:
r2
The latest release of gbiloader is available on GitHub: https://github.com/Guspaz/gbiloader/releases
Instructions on how to set it up and use it can be found in the README.md file in the release zip, and also on the front page of the github repository here: https://github.com/Guspaz/gbiloader
Here's the changelog, which I'll keep up to date:
r2
- Update included GBI to 20170624
- Switch build from dollz3 to dolxz (smaller gbiloader DOL file)
- Updated included Swiss to an unofficial custom build of r414 that has auto-load disabled for boot.dol
- Initial release. Includes GBI 20170410 and Swiss r387