Is there anyway to convert a PAL code to USA?

Game Hacks, Trainers, Cheats

Moderator: Ralf@gc-forever

Post Reply
KOR Phoenix
Posts: 7
Joined: Mon Mar 13, 2023 3:09 am

Is there anyway to convert a PAL code to USA?

Post by KOR Phoenix » Wed Mar 15, 2023 5:03 pm

I was wondering if there’s anyway possible to convert a PAL code to USA, I found a code that I wanted to use but only saw it in the PAL region. Using the AR for the console and need it to also be converted to the ARMax format if possible, thank you!

Change Pikmin limit
0415EF60 38C000FF
04150D74 388000FF
04D4FA1B 00000000
0413F9F0 388000FF
0419579C 2C0000FF
0415E964 2C0000FF

Pikmin 2

[DOL-GPVE01-NOA]; Game-ID: 2DA
This is the game ID that I wanted the code to be converted to.
User avatar
AdolescentSeagull
Posts: 21
Joined: Wed Mar 01, 2023 4:44 pm

Re: Is there anyway to convert a PAL code to USA?

Post by AdolescentSeagull » Fri Mar 17, 2023 3:44 pm

I converted this into NTSC-U but the game freezes when loading a stage.
I then went back to see if I could get your cheat code to work on the PAL version of the game and it freezes there too.
I tested both codes on Dolphin.
Could I ask where you found this code?
Here's what I came up with, for reference:

Code: Select all

QX2V-PXKQ-QRM97
JK1D-1UZH-YXEB3
K69W-01DP-KDXU9
MCJ1-P2XT-7WPUM
4KCX-2RKR-6PZ09
5KT8-Q1W7-AM8ME
Last edited by AdolescentSeagull on Fri Mar 17, 2023 5:39 pm, edited 1 time in total.
KOR Phoenix
Posts: 7
Joined: Mon Mar 13, 2023 3:09 am

Re: Is there anyway to convert a PAL code to USA?

Post by KOR Phoenix » Fri Mar 17, 2023 5:21 pm

Well that’s not good, the website I used was https://pikmintkb.com/wiki/Pikmin_2_cheat_codes. It had a bunch assorted codes from different regions. I’ve had help converting some of these codes and they did end up working. However with this one I found in the list, I also tested out the code provided but wasn’t too confident that’ll work since it froze on your end, it did end up freezing as soon as it tried load a stage. Could just be the code wasn’t generated properly or it could be on my end setting the value too high.
Post Reply