Setting up network for PSOLoad [Resolved]

Discussion / Support for Softmods (SDML, AR, Game Hacks)
Post Reply
WorldWideNoob
Posts: 5
Joined: Wed Jun 16, 2021 11:57 pm

Setting up network for PSOLoad [Resolved]

Post by WorldWideNoob » Thu Jun 17, 2021 12:17 am

Hello,
I would need some help to set up the network for the PSOLoad exploit.
My GameCube already has a broadband adapter, Memory Card and the PSO 1&2 game (not the 1&2Plus nor the 3).
I really don't understand how to setup the network in order to make the GameCube discover my computer or the PSOLoad executable detect my GameCube.
I saw the video description under this video but it doesn't seems to work for me (unable to set the 192.168.1.100 address as seen in the video description to my router).
https://www.youtube.com/watch?v=KdPTX39vEuc

So should I use specific IP address with another specific network config?

Thanks.
Last edited by WorldWideNoob on Sat Jun 19, 2021 12:34 am, edited 2 times in total.
User avatar
seeWood
Posts: 18
Joined: Wed Dec 04, 2019 9:38 am

Re: Setting up network for PSOLoad

Post by seeWood » Thu Jun 17, 2021 9:19 am

Hey, yeah the Gamecube needs a specific setup in order to communicate with the network.

The IP Adress you need is:
192.168.1.32

You cannot change the GC ip adress, it is static - so you need to change your network settings.

Modern Routers are set to 192.168.0.1 these days. So you need to change it to 192.168.1.1

After i changed my network to this specific IP layout i was able to create backups with my qoob and flash fw over network.
WorldWideNoob
Posts: 5
Joined: Wed Jun 16, 2021 11:57 pm

Re: Setting up network for PSOLoad

Post by WorldWideNoob » Thu Jun 17, 2021 10:36 am

I'll try it later today.
Thank you
WorldWideNoob
Posts: 5
Joined: Wed Jun 16, 2021 11:57 pm

Re: Setting up network for PSOLoad

Post by WorldWideNoob » Fri Jun 18, 2021 12:37 am

I'm definitely unable to setup a router network connection with 192.168.1.1 (cause it would break our network).
I'll think I'll buy an Ethernet crossover cable and connect the GameCube directly to my PC.
How to configure the network for this case?
User avatar
Extrems
Posts: 1142
Joined: Tue Aug 17, 2010 10:40 pm
Location: Québec, Canada
Contact:

Re: Setting up network for PSOLoad

Post by Extrems » Fri Jun 18, 2021 1:17 am

A crossover cable isn't necessary with modern NICs.
WorldWideNoob
Posts: 5
Joined: Wed Jun 16, 2021 11:57 pm

Re: Setting up network for PSOLoad

Post by WorldWideNoob » Fri Jun 18, 2021 1:57 am

Thanks, I cancelled the purchase of the crossover cable.
So, I still don't know how to setup the network for Windows 10 (so it can recognize the GameCube without a router, and maybe also set the required ip address).
WorldWideNoob
Posts: 5
Joined: Wed Jun 16, 2021 11:57 pm

Re: Setting up network for PSOLoad

Post by WorldWideNoob » Fri Jun 18, 2021 11:45 pm

Nevermind, I finally been able to configure the network.
It was easier than I thought.

So yeah the exploit worked.
Post Reply