Comparison of how long it takes to boot Swiss via Softmod

Discussion / Support for Softmods (SDML, AR, Game Hacks)
Post Reply
FIX94
Posts: 54
Joined: Fri Aug 05, 2011 1:55 pm

Comparison of how long it takes to boot Swiss via Softmod

Post by FIX94 » Sun Feb 21, 2016 4:53 pm

So now with all these exploits I was wondering, which one is the fastest of them all?
These times were measured on a PAL GC starting directly after the GameCube logo fully faded out and ending on the first frame of Swiss actually loaded up.

1st Place: 11.1 seconds with a SD Media Launcher (SD Gecko in Slot A)
2nd Place: 13.4 seconds with Home Bros. in 60Hz
3rd Place: 13.9 seconds with Home Bros. in 50Hz
4th Place: 15.5 seconds with WW Hack v1.1 in 50Hz
5th Place: 16.3 seconds with a SD Media Launcher (SD Gecko in Slot B)
6th Place: 21.8 seconds with WW Hack v1.1 in 60Hz
7th Place: 24.5 seconds with WW Hack v1.0 in 50Hz
8th Place: 27.1 seconds with Twilight Hack in 50Hz
9th Place: 29.6 seconds wtih Twilight Hack in 60Hz
Last Place: 30.7 seconds with WW Hack v1.0 in 60Hz

So there you have it, if you thought the SD Media Launcher is your best way of booting homebrew without a hardmod then think again :D
A SD Media Launcher is limited to 2GB SD cards or smaller as well but with a savegame exploit you can use whatever SD Card in a SD Gecko because Swiss itself does not have such a limit ;)
Last edited by FIX94 on Sat Feb 27, 2016 12:58 am, edited 1 time in total.
Top
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:
Contact emu_kidid

Re: Comparison of how long it takes to boot Swiss via Softmod

Post by emu_kidid » Tue Feb 23, 2016 1:27 am

Times from cold power on with IPL related mods:

1st place: < 1 second with a custom IPL replacement
2nd place: >= 3.5 seconds with Qoob PRO and with Swiss as flash plugin (depends on how fast you can mash A and if it's your first plugin)

I don't have a Viper GC Extreme cube handy right now but that wouldn't be as fast since it always wants to reset DVD.
Image
Top
User avatar
KirovAir
Posts: 214
Joined: Sat Jan 22, 2011 12:13 pm
Location: Netherlands

Re: Comparison of how long it takes to boot Swiss via Softmod

Post by KirovAir » Sun Apr 17, 2016 9:09 am

Just wanted to say thanks for all the softmods. Bought an SD gecko for a friend and he is in love with the options swiss are offering him right now. :)
"The only thing more dangerous than a hardware guru with a code patch is a programmer with a soldering iron."
Top
andre104623
Posts: 694
Joined: Wed May 07, 2014 2:24 pm

Re: Comparison of how long it takes to boot Swiss via Softmod

Post by andre104623 » Mon Apr 18, 2016 5:33 pm

emu_kidid wrote:Times from cold power on with IPL related mods:

1st place: < 1 second with a custom IPL replacement
2nd place: >= 3.5 seconds with Qoob PRO and with Swiss as flash plugin (depends on how fast you can mash A and if it's your first plugin)

I don't have a Viper GC Extreme cube handy right now but that wouldn't be as fast since it always wants to reset DVD.
How long do you think the custom ipl replacements will be out for end users
Top
novenary
Posts: 1754
Joined: Mon Dec 30, 2013 7:50 am

Re: Comparison of how long it takes to boot Swiss via Softmod

Post by novenary » Mon Apr 18, 2016 6:45 pm

Custom IPL replacement is just a Qoob with a custom bios.
Top
andre104623
Posts: 694
Joined: Wed May 07, 2014 2:24 pm

Re: Comparison of how long it takes to boot Swiss via Softmod

Post by andre104623 » Mon Apr 18, 2016 9:35 pm

Streetwalker wrote:Custom IPL replacement is just a Qoob with a custom bios.
No its not. There is one in the works but i didnt get very much info about it. Also he listed the qoob pro with swiss on flash right below custom ipl replacement
Top
Post Reply

Return to “Softmods”