Page 1 of 1

SSBB on Wasp Fusion?

Posted: Fri Dec 05, 2014 8:08 pm
by Fireskull
Hey guys. I'm trying to play brawl from my iso using my new Wasp, but I get the "An error has occurred" screen after the wasp resets the wii. I know there was a way for it to work, but I can't seem to find any information on this issue. Any help would be appreciated :).

I loaded my brawl iso onto an SD card using WBFS Manager 4.0 which scrubs the iso to reduce image size, if that helps any.

Re: SSBB on Wasp Fusion?

Posted: Fri Dec 05, 2014 9:23 pm
by emu_kidid
To be brutally honest, I don't think we really know much about running Wii games on the WASP/WKF.

Re: SSBB on Wasp Fusion?

Posted: Fri Dec 05, 2014 9:42 pm
by Fireskull
Ah okay. Is there somewhere else I should look? I mean... Everything else works just fine :). I just cant figure out how to launch it without it giving me an error.


Thanks mate.

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 7:41 am
by emu_kidid
It's possible the issue is caused by it being dual layer. Try another dual layer game, make sure you're on the latest firmware too.

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 7:39 pm
by Fireskull
I just checked with another known dual layer disk that I dumped, and the same "An error has occurred" error shows up when I try to load it. As for firmware, my wii is running 4.3U and my wasp is says "SW Version: 1.5" and FPGA Version: 1.0"

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 7:46 pm
by novenary
You should update your WASP, the FPGA version has to match the menu version.

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 8:09 pm
by Fireskull
Okay.. The only update ive done so far was to the 1.5 firmware that Megalomaniac provided a link for. I don't remember seeing any way to update the FPGA version though. Sorry for the trouble but any help is appreciated :)

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 10:08 pm
by novenary

Re: SSBB on Wasp Fusion?

Posted: Sat Dec 06, 2014 10:43 pm
by Fireskull
Okay thanks Streetwalker. But isn't that the same as the 1.5 from the download that Megalomaniac provided in another thread I made? viewtopic.php?f=16&t=2625
I probably did something wrong along the line but my wasp functions normally (to me at least)
I took that warning to mean do not start the process with 1.3 or 1.5, but start with 1.0 then update to 1.5

Also, the 1.5 USA update from your link says PAL in the WBFS manager that I use.

Re: SSBB on Wasp Fusion?

Posted: Sun Dec 07, 2014 2:37 am
by megalomaniac
Streetwalker wrote:You should update your WASP, the FPGA version has to match the menu version.
FPGA version 1.0 is always displayed on WKF menu
Only the SW Version changes from 1.0 to 1.5

Re: SSBB on Wasp Fusion?

Posted: Sun Dec 07, 2014 2:42 am
by Fireskull
Okay that clears some confusion up. If that's the case, isn't my wasp already up to date? I have seen mention of a 1.9 version somewhere but nothing more than that. If I can't play my backed-up isos of dual layer games, its not a big deal for me because I have a small library of everything else lol. (On a side note, sweet avatar, Megalomaniac.)

Re: SSBB on Wasp Fusion?

Posted: Sun Dec 07, 2014 2:50 am
by megalomaniac
1.9 is wiikey1 i think