Internal SD Gecko mod tutorial?
-
- Posts: 8
- Joined: Sat Feb 12, 2011 2:35 am
Internal SD Gecko mod tutorial?
Hey,
Anyone have a link to the internal gecko mod? I can't find it anywhere. All the links aren't valid anymore. I've got an SD Gecko on the way that I'll probably use on my GC, but since I was going to replace the dead drive on my Wii anyway I thought I might as well give it a shot. I was going to do it this weekend but all I can find is the pinout diagrams.
I need it spelled out for me. The original tutorial on wiinewz was pretty good as I remember.
Anyone have a link to the internal gecko mod? I can't find it anywhere. All the links aren't valid anymore. I've got an SD Gecko on the way that I'll probably use on my GC, but since I was going to replace the dead drive on my Wii anyway I thought I might as well give it a shot. I was going to do it this weekend but all I can find is the pinout diagrams.
I need it spelled out for me. The original tutorial on wiinewz was pretty good as I remember.
Re: Internal SD Gecko mod tutorial?
Match the pins and solder
-
- Posts: 8
- Joined: Sat Feb 12, 2011 2:35 am
Re: Internal SD Gecko mod tutorial?
Fair enough... I remember it being slightly more complicated than that.
Re: Internal SD Gecko mod tutorial?
Ok a bit snarky on my part. But in all seriousness, if you simply want to internalize a SD Gecko, you should be able to solder wires from pin to pin without much trouble. Those are pretty big pins. Might need a dremel if you want to add an external slot. Maybe drill a slot and superglue it to the case on the inside.RedCapsMan wrote:Fair enough... I remember it being slightly more complicated than that.
If you don't have experience soldering, check youtube for some useful guides. Were you wanting the front SD to act as the Gecko? Add a switch, that's about it.
Last edited by thesund0g on Sat Feb 12, 2011 5:26 am, edited 1 time in total.
-
- Posts: 8
- Joined: Sat Feb 12, 2011 2:35 am
Re: Internal SD Gecko mod tutorial?
Yes, thats exactly what I want . I know there are some problems with the mod, as in the HBC 8 not recognizing files and some compatibility issues, but I thought if I could take a good look at the wiring I could put in a switch to turn it off. That way if it turns out to be completely useless I can turn it off and not have to open her up again to take it out! If I remember correctly there are actually points on the board that connect to the SD slot that are easier to solder to than the actual pins on the SD slot itself. I'm gonna try to contact the original guy who did this in the first place. I think I found his website, but its a modding service not a repository of guides.thesund0g wrote:Were you wanting the front SD to act as the Gecko?
With Swiss having so much potential I'm surprised more people wouldn't want to try this.
Edit: We're editing our posts at the same time! I'm a pretty experienced chip installer. If you can put a disc in it I've made it play a backup... for the most part.
Last edited by RedCapsMan on Sat Feb 12, 2011 5:35 am, edited 1 time in total.
Re: Internal SD Gecko mod tutorial?
If your drive is dead, you could gut the main part (leave the logic bits) and glue the SD gecko (internally) to the disc slot. Radical and messy, but it'd look fine from the outside and would be super easy to fit.RedCapsMan wrote:Yes, thats exactly what I want . I know there are some problems with the mod, as in the HBC 8 not recognizing files and some compatibility issues, but I thought if I could take a good look at the wiring I could put in a switch to turn it off. That way if it turns out to be completely useless I can turn it off and not have to open her up again to take it out!thesund0g wrote:Were you wanting the front SD to act as the Gecko?
With Swiss having so much potential I'm surprised more people wouldn't want to try this.
-
- Posts: 8
- Joined: Sat Feb 12, 2011 2:35 am
Re: Internal SD Gecko mod tutorial?
The problem with that is that Swiss needs to have a retail GC disc spinning in order to run games. At least until emu_kid figures out how to get past that. Besides, I've had a replacement drive sitting around forever waiting for me to get around to it.
Re: Internal SD Gecko mod tutorial?
Have you heard about http://archive.org ? You can enter a URL there and often they have older versions of the pages, so you can try this with a tutorial website.
Re: Internal SD Gecko mod tutorial?
Ooops, posted gc version, sorry
If you don't need a step by step tutorial:
oi54.tinypic.com/2gts290.jpg
(it is from german forum project-casemod.de)
If you don't need a step by step tutorial:
oi54.tinypic.com/2gts290.jpg
(it is from german forum project-casemod.de)
Last edited by ct_the_1 on Sat Feb 12, 2011 11:45 pm, edited 1 time in total.
ct_the_1 (currently very busy and rarely online)
Re: Internal SD Gecko mod tutorial?
Something like this?
http://forums.nintendo-scene.com/index.php?topic=955.0
Would the SD slot still function like normal for wii applications?
http://forums.nintendo-scene.com/index.php?topic=955.0
Would the SD slot still function like normal for wii applications?
Re: Internal SD Gecko mod tutorial?
Just match up the pins on this site with the internal ones in the console
http://ngc.scorpei.com/GUIDE-SD_adapter.html
Maybe install a switch on the sense line so you dont get errors if no memcard or SD is inserted.
http://ngc.scorpei.com/GUIDE-SD_adapter.html
Maybe install a switch on the sense line so you dont get errors if no memcard or SD is inserted.