First Gamecube Portable - The PortaCube [Done!]

Portables, case replacements, mods etc, all in here!
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: First Gamecube Portable - Worklog

Post by emu_kidid » Mon Apr 09, 2012 1:56 pm

if only I could putty that well!
Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Mon Apr 09, 2012 1:58 pm

emu_kidid wrote:if only I could putty that well!
You will sand it anyway ^^ and i did this for the first time :D

It's really not hard to do ^^
Last edited by _Nold_ on Tue Apr 10, 2012 8:23 am, edited 1 time in total.
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: First Gamecube Portable - Worklog

Post by megalomaniac » Mon Apr 09, 2012 2:20 pm

since the wiikey has not not arrived you can always use the time to work on the case...
i spent many days/hours of sanding, priming, and fine sanding while modding my full size case

and i still have not been able to finished it yet...
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Mon Apr 09, 2012 3:04 pm

megalomaniac wrote:i spent many days/hours of sanding, priming, and fine sanding while modding my full size case
Yea, i just did some fast sanding, that will really take some more time ^^

And the edges between the Analog-Stick/D-Pad and the Buttons and the C-Stick are really hard stuff :/
i guess i need to fill them again >.<
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Wed Apr 11, 2012 5:25 am

yesterday my wiikey arrived and i wanted to put it in and give it a try.. I soldered it in as i remembered that my controller is still in pieces -.-

So i guess i really need to finish the case before working on the hardware again -.-'
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
infact
Posts: 346
Joined: Tue Mar 29, 2011 4:35 am
Location: Germany

Re: First Gamecube Portable - Worklog

Post by infact » Wed Apr 11, 2012 10:01 am

or use an external controller ;-) i had the problem too, and just plugged in the front board again :D
infact
Image Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Wed Apr 11, 2012 10:23 am

infact wrote:or use an external controller ;-) i had the problem too, and just plugged in the front board again :D
Yea, but i didn't want to solder on my "brand new" frontboard :lol:
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
infact
Posts: 346
Joined: Tue Mar 29, 2011 4:35 am
Location: Germany

Re: First Gamecube Portable - Worklog

Post by infact » Wed Apr 11, 2012 3:59 pm

okay, but i said plugged (no soldering involved :P)
but i guess you removed the small black connector from your mainboard...

pics
infact
Image Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Thu Apr 12, 2012 11:07 am

.. I guess my project died today... i wired everything up to test the wiikey... Power on - Nothing happend..

then i saw just a little bit of smoke comming out of one part... (see pic, it's this blue DR7 thing in the middle)
It's just glimmering for a half-second and that's it... no idea what this part is.. resistor?
It's connected to 12V on both sides... i removed everything except the FFC Cable from the wiikey..

I trimmed the psu just a little bit, like this: http://forums.modretro.com/viewtopic.ph ... &start=130
But i only removed the 2 coils that would normally be on that picture.

I guess i just killed it..
Attachments
20120412_124738.jpg
(1.69 MiB) Not downloaded yet
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

Re: First Gamecube Portable - Worklog

Post by Ashen » Thu Apr 12, 2012 12:46 pm

Bummer, I hope nothing bad happened to your Wiikey in the process. One thing I've learned is to test the motherboard after every step. Never test multiple modifications at once as its so much harder to pinpoint where you've gone wrong if something bad like this does happen.

New board and try again I hope? Don't give up!
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Thu Apr 12, 2012 3:15 pm

Yea.. i normally would do it like you said, too... hm new board.. If i find one.. in the meantime i will work on the case. there is just too much money in this project to give up.. i just have no idea why this f***ing board is broken now.. I'm really disapointed of myself :/

Send from my Android Phone xD
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

Re: First Gamecube Portable - Worklog

Post by Ashen » Thu Apr 12, 2012 3:54 pm

It happens man, don't let it get ya down.

If you keep an eye on ebay, you can find lots of "broken" gamecubes for super cheap. I got a lot of 6 cubes recently for $9 + $19.99 shipping. Most of these "broken" cubes just have sticky power buttons or are scuffed up or get disc read errors becuase the DVD drives are failing. Still totally useable for our intents and purposes. :D
User avatar
Ploggy
Posts: 55
Joined: Tue Jan 18, 2011 1:09 am

Re: First Gamecube Portable - Worklog

Post by Ploggy » Thu Apr 12, 2012 4:02 pm

Shame, luckily GC's are pretty cheap now. Don't know if you have a shop called Cash Generator where you are but by me they sell GC's for around £10 (some even less + they are all fully working too)
User avatar
infact
Posts: 346
Joined: Tue Mar 29, 2011 4:35 am
Location: Germany

Re: First Gamecube Portable - Worklog

Post by infact » Thu Apr 12, 2012 6:41 pm

unfortunately, most of the time they are expensive here on ebay germany.

EDIT: btw. this thingie should be a resistor, as you said.
Last edited by infact on Thu Apr 12, 2012 6:45 pm, edited 2 times in total.
infact
Image Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Thu Apr 12, 2012 6:43 pm

Got a new one xD 6€ with broken dvd drive :)


I'm back in the race! XD
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
liquitt
Posts: 1810
Joined: Thu Apr 01, 2010 5:43 am
Location: neverland

Re: First Gamecube Portable - Worklog

Post by liquitt » Fri Apr 13, 2012 12:36 pm

next time a board dies, i might have another one for you ;)
i'll exchange for other parts

cheers on the project and keep going!
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr

we also have a wiki filled with knowledge
http://is.gd/dX58Rm
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Fri Apr 13, 2012 3:49 pm

Thanks mate!

Yea, then i would have 2 cubes in pieces, so there should be something interesting for ya ^^
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
liquitt
Posts: 1810
Joined: Thu Apr 01, 2010 5:43 am
Location: neverland

Re: First Gamecube Portable - Worklog

Post by liquitt » Fri Apr 13, 2012 5:45 pm

yeah i always need that plastic bullshit, i'm messing around with a dremel lately :D
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr

we also have a wiki filled with knowledge
http://is.gd/dX58Rm
inukaze
Posts: 54
Joined: Fri Mar 23, 2012 7:27 pm

Re: First Gamecube Portable - Worklog

Post by inukaze » Sat Apr 14, 2012 5:45 am

Someone have a full tutorial or walktrought to made this modification by my hand ??? i really wanna try it
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: First Gamecube Portable - Worklog

Post by emu_kidid » Sat Apr 14, 2012 8:09 am

Have a read around, google is VERY helpful.
Image
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Tue Apr 17, 2012 11:02 am

Just a quick status update :)
Still waiting for my new cube to arrive.. At the weekend i did a little bit more sanding and filling.
The Car-Putty is really nice to get everything in shape, but it's pretty rough. So i applied some of the model-filler after 2 sanded layers of car putty.
The filler is not as easy to use as the car putty but gives a much better surface after sanding :)

After sanding it again i applied just a little bit more so some spots that were still uneven. Now i hope that i only need to sand it one more time before it's ready to get painted.. at least after i cut the holes for the SD-Slots, Powersupply, Headphones, Shoulder-buttons,.... ^^
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

Re: First Gamecube Portable - Worklog

Post by Ashen » Tue Apr 17, 2012 12:20 pm

Nice! Throw a coat of primer on before you coat with paint, its amazing the imperfections a coat of primer will show. Then you can easily hit any problem areas before you put on final coats of paint.
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Thu Apr 19, 2012 5:30 am

Hey, good news: New Cube arrived and works fine :)
It's a DOL-101, too.. That's fine but i was hoping for a 001.. but it dosn't really matter ^^

I hope i'll find some time at the weekend to trim it down.. but this time i will not trim as much as last time, because i now know how small it has to become ^^
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
_Nold_
Posts: 212
Joined: Mon Nov 14, 2011 7:55 am
Location: Germany
Contact:

Re: First Gamecube Portable - Worklog

Post by _Nold_ » Sat Apr 21, 2012 12:29 pm

Sooo..

Trimmed down new DOL-101 board.. And it works :)
I didn't trim that much this time, because i now know how big the case is i'm using..

/EDit:

Just installed WKF.. it's getting recognised, blinks blue if i press the pin 29 button but nothing happens :/
Gamecube dosn't show any game... i formated the SD with WBFS and did only put on the Ver. 1.5 Update on it :/
Guess i need to check my wireing/adapter -.-' ..

"Disc could not be read" ... yea.. guess need to check wireing -.-''''


//Edit 2:
Problem found! One pin was connected to gnd -.-
Now it's directly booting into the wkf-menu, but then seems to freeze.. can't start the update or move the arrow :/

//Edit 3:
i booted the wkf-recovery and noticed that it dosn't freeze.. it just dosn't like my gamepad xD
Don't know why.. it works fine in the gc-bios :(


...... F*** it.. just read that this is an compatibility issue... (my?) DOL-CPU-20 is not working with WKF....
This is really starting to become a mess.. guess i need yet another mainboard.....

Source: http://forums.modretro.com/viewtopic.ph ... &start=120
Attachments
20120421_170917.jpg
WKF installed but faulty?!
(1.77 MiB) Not downloaded yet
20120421_142359.jpg
New Trimmed board
(1.82 MiB) Not downloaded yet
| DOL-001 (EUR) Indigo | WKF Plug'n'Play Diskdrive Replacement | BBA |
| Internalised: WaveBird, Keyboard Adapter, MemoryCard, SD-Adapter |

| DOL-001 (EUR) | >> First Gamecube Portable - Worklog
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: First Gamecube Portable - Worklog

Post by emu_kidid » Sun Apr 22, 2012 12:09 am

Or.. you can be the first to test Swiss as the wkf flash..give me a few days to prepare
Image
Post Reply