Ok guys, i finally got my wiikey fusion cable (thanks _nold_!)
I hooked everything up, checked the dip switches and i get a red light on wiikey fusion board as well as a warning on the screen telling me to power down and refer to my user manual.
Has anyone come across this problem before? and what should be my next course of action to fix it?
Wiikey Fusion - Red Light?
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wiikey Fusion - Red Light?
check continuity, check switch functionality, check voltage level to wkf
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
Re: Wiikey Fusion - Red Light?
sorry megalo, im kind of new to this. Could you elaborate?
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wiikey Fusion - Red Light?
do you have a multimeter?
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
Re: Wiikey Fusion - Red Light?
yes, i bought it last weekend but i havent used it as yet
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wiikey Fusion - Red Light?
read this, play with your multimeter as shown in the examples...
then apply the methods to check your connections...
http://learn.adafruit.com/multimeters/
then apply the methods to check your connections...
http://learn.adafruit.com/multimeters/
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
Re: Wiikey Fusion - Red Light?
Red light usually means something is going wrong, i.e. not enough power or no power at certain pins, or the eject/switch. Double check all connections visually and with a multimeter I guess - also ask Nold if he'd tested it prior to sending (pretty sure he would have though).
Are you putting it the right way in the slot?
Are you putting it the right way in the slot?