how to flash clone xenochip

[LottieBot Turbo]

hi everybody im new to modding and i have found that my xenochip is extremely hard to install on my GCN so i turned to making my own so i can solder via wires.anyways i have been really really confuzed and stressed out on how to properly flash the atmega8L tqfp.the open source project i am using contains a icsp pin.If anybody can clearly explain how to flash these darn things would help me out alot :3

[andzlay]

You can also wire the original xeno. Would that be an option for you?

[meneerbeer]

I think you need an ISP programmer. You can get those really cheap on ebay: http://www.ebay.nl/itm/New-USBASP-USBIS ... SwKIpWAgOh

[LottieBot Turbo]

You can also wire the original xeno. Would that be an option for you?

i actually am going to be building my own easier to install xenochip for less experienced modders like myself. i currently have a arduino and a USBtinyISP and i am following a guide on instructables:(http://www.instructables.com/id/Homemad ... -the-Chip/) on how to flash this chip but i was hoping for better understanding on what is going on regarding the flashing process