Xeno GC Install issues

Portables, case replacements, mods etc, all in here!
Post Reply
collinlg9
Posts: 5
Joined: Tue Jan 28, 2020 2:43 am

Xeno GC Install issues

Post by collinlg9 » Tue Jan 28, 2020 2:49 am

I just recently received/installed a XenoGC Modchip and I soldered it in, turned on the console, and I get a solid red light. No blinks, just a solid red light. I know that it is receiving power, but I have a bad connection somewhere. How do I test for continuity (which leads should I touch to which joints) so that I can find out which joint(s) are not making a proper connection to the points on the gamecube?
Top
Post Reply

Return to “Hardware / Modding”