Another DIY Programmer Design
-
silversteel
- Posts: 5
- Joined: Thu Nov 16, 2023 9:46 pm
Another DIY Programmer Design
There's probably a million ways to flash your CPLD but this is what I've been using, its a parallel port programmer design I threw together based on the old cheap-tag for programming the IDE-EXI and other 3.3v XC9500 series CPLD devices like the USBGecko clones, it uses USB-C to provide power to the programmer, I made it so all I'd need to do is just use a clip connected to the programmer and the target board and plug it to the back of my old laptop. Project files and info on my github https://github.com/silverstee1/DB25CHEP-TAG