gc-forever - Gamecube/Wii Forums

The Wii DVD drive requires a different type of eject switch than the ones I bundled in. It needs a normally closed switch going to ground. Then, when opened (pressed) gets switched to 1.9v to drive the eject signal high. Thats why eject wasnt working for you, because the 1.9v is not needed for the WODE/Wiikey (again I didnt expect anyone to use these for an actual Wii DVD drive).

It is possible to connect both the WODE and the Wii DD to the GC at the same time via FlatWODE. You would need to change the above mentioned switch though so eject would work.

btw last one sold....so exchanging yours might not be that easy but btw, i tested them all before shipping them out, too!
please test it on your wode and let us hear the results!

yes i will test it. but it will take 3 weeks -> my wode comes directly from OEM out of the deepest china ^^
wode is going to me today. lets hope HK post is really fast this time

i will let you know when its arrived.

Ashen, I'm looking for a front panel, or a complete box for replacement purpose. Do you have anything to part from considering all those broken cubes?

wode arrived today after 2 day in the german Zoll... will try it tonight and let you know if it works

ok. i got my wode to boot. it shows gamelist and so on.
i chose the config iso and boot it but the wode ejects it automatically after i pressed start in the gamecube menu and i cant load it the wode will eject it everytime.

Everything connected proper? Pics of connections?

one flat cable wasnt connected proper. reconnected all flat ribbon cables and now it boots
mode firmwareupdate to the read only version 2.8.

but it wont load any iso. every time i start the game it says iso ejected and then it refuses every iso.
I tried it with the wode config disc.

€dit:

got it to work right now. the problem with ejecting was an issue with the wode settings. the setting stealth mode was the reason for that.
and i found the reason for the nonworking LCD with white backlight.
the flat ribbon cable which is between the LCD and the WODE Board has problems.

but i dont need the LCD when the wode menu is working

now my gamecube is nearly complete.

Hey, i know it's quite late, but maybe You or someone else got one of these adapers for sell? I would be gratefull.

Are there any plans to make any more of these adapters? Would be interested in buying one. Thanks.

im also interested in a new batch

If ever assembling new ones, I would be interested in one too.

im interested in buying one of your awesome plug n play adapters, ashen