gc-forever - Gamecube/Wii Forums

Don't mind that question. I educated myself. According to WiiPower, it looks like audio streaming is a really hard nut to crack for soft-modded Wii's. Too bad I no longer have my copy of Eternal Darkness...

Sounds interesting. SD-Gecko is quite limited with SD (not SDHC) cards and max capacity of 2 GB. That's one full-sized game so I'll definitely have to check this out.

So SD-boot 1.0 will be compatible with this solution. That's great news.

Will 1.0 support multidisc though? Some games (Like RE4) will ask you to save before switching discs if I remember it right, so it's no problems. However other games (Like REmake) will not. On current sd-boot you can play the game fine, find the last save point before the end of the disc. Then you have to actually stop using sd-boot and play the game from a real disc and switch to disc 2 like normal. Save again on disc 2. Now you can continue playing with sd-boot.

Will SD-boot 1.0 be able to handle this? Switch the .gcm when the game asks for it?

SD-Gecko fully supports SDHC in sd-boot already and in 1.0. In 1.0 there's also multidisc support.

I'll get at least 2 HDD adapters, thanxs a lot 4 the store idea friend.

hi

will the shop open before xmas ?

how much one hdd adapter for the Gamecube will cost ?

can't wait

akumajo wrote:hi

will the shop open before xmas ?

how much one hdd adapter for the Gamecube will cost ?

can't wait

just wait

I don´t speak English very well, but this is my question:

Does the adapter need a bootdisc to run homebrew (With XenoGc)?
Or is there any way to run homebrew directlly from the hard drive?

The idea is not use the laser, as in the case of qoob pro (Directly in the flash memory runs the necessary homebrew. For example: SD Boot).

rockslayer wrote:I don´t speak English very well, but this is my question:

Does the adapter need a bootdisc to run homebrew (With XenoGc)?
Or is there any way to run homebrew directlly from the hard drive?

The idea is not use the laser, as in the case of qoob pro (Directly in the flash memory runs the necessary homebrew. For example: SD Boot).

you can put sdboot on the flash of your qoob chip and use it to run games and homebrew from the harddrive. but if you only have a xeno chip you will need to use a boot dvd. there is no other option.

exactly, you can't boot directly from the harddrive (if that was your question)
you need homebrew software to access the harddrive first.