Page 1 of 1
GC freezes after selecting swiss
Posted: Tue Apr 23, 2013 5:26 am
by nukear
So basically after I select swiss from the wkf menu, it hangs right before the cube logo pops up. All the other games play fine.
I have a Fat32(i think) formatted card in the SD gecko slot. I heard of one other guy that had this problem, dunno if he fixed it tho.
Any suggestions?
Re: GC freezes after selecting swiss
Posted: Tue Apr 23, 2013 5:50 am
by emu_kidid
use the PAL ISO.
Re: GC freezes after selecting swiss
Posted: Tue Apr 23, 2013 6:03 am
by nukear
I'll try that out thanks!
Re: GC freezes after selecting swiss
Posted: Wed Apr 24, 2013 4:32 am
by nukear
Ok, so got it working.
I'm pretty new to the swiss scene, but since swiss is able to load directly from the wkf slot, is there a real point in using an SD gecko slot in a portable?
Does swiss even utilize the sd gecko slot anymore?
Sorry if these are dumb questions....
Re: GC freezes after selecting swiss
Posted: Wed Apr 24, 2013 5:01 am
by emu_kidid
The main focus for Swiss is the SDGecko slot, anything else that works, take it as a bonus
Also, don't forget, but the WKF SD card slot is READ only.
Re: GC freezes after selecting swiss
Posted: Wed Apr 24, 2013 6:51 am
by MockyLock
emu_kidid wrote:The main focus for Swiss is the SDGecko slot, anything else that works, take it as a bonus
Also, don't forget, but the WKF SD card slot is READ only.
So, as for an answer at my question a few week ago, it will never be possible to copy ISO from IDE-EXI to WKF SD card directly...
Re: GC freezes after selecting swiss
Posted: Fri Jun 07, 2013 8:21 am
by 47iscool
Swiss 0.3 for some reason or another won't work with SD Gecko in slot 2, it works fine in slot 1.