gc-forever - Gamecube/Wii Forums

Posted: **Sat Apr 22, 2017 9:21 am**

Hello,

Is it possible to tap into the PAL GC to access CSYNC and not CSYNC over composite (which seems to be the default) without using any sync stripper? A bit like what can be done with a Mega Drive and its Sony CXA1145 video encoder.

I vaguely remember seeing a PCB photo with some pins annotated for the GC that may imply this would be possible, but I cannot find it anywhere, so I'm afraid I may have just dreamed it...

Posted: **Sat Apr 22, 2017 9:56 am**

Not that I'm aware of. Composite is most common on European TVs, easiest to start with if you have yet to establish what you need.

A normal Mega Drive has CSYNC output. It doesn't work properly on the Nomad though.

Posted: **Sat Apr 22, 2017 11:12 am**

The only way to get a separate CSYNC signal is to use GCvideo lite.

Posted: **Sun Jun 25, 2017 11:15 am**

Hey,

sorry for late response, thanks for your replies!

I will make a small sync stripper then.

gc-forever - Gamecube/Wii Forums

CSYNC only directly from the GC

CSYNC only directly from the GC

Re: CSYNC only directly from the GC

Re: CSYNC only directly from the GC

Re: CSYNC only directly from the GC