Page 1 of 1

Anybody know this cable? Is it worth the money?

Posted: Mon Mar 26, 2012 3:56 pm
by WoodyWoodpecker
Just found one of these http://www.wolfsoft.de/shop/product_inf ... ,pal).html on ebay and just wanted to ask if it warrants the hefty price tag (on Wolfsoft it costs about 100€). How would this cable compare to the VGA-cable / official RGB-cable? The Site says it's the "nonplusultra in image quality" and offers "20% better image quality" compared to the standard (the official one, I guess) RGB-cable.

Re: Anybody know this cable? Is it worth the money?

Posted: Mon Mar 26, 2012 4:13 pm
by pr0ton
100 euro for some rubber and metal, that makes good money :D. As long if the material used for the leads isn't ultra- thin or high resistance, there will be no noticable difference I think. Preferably the cable is shielded, but apart from that..

Re: Anybody know this cable? Is it worth the money?

Posted: Mon Mar 26, 2012 5:03 pm
by HomelandReloaded
I don't get it. For that price, and if you have a Digital AV Out port anyway, you can buy an official component video cable which is still better than the official RGB cable (I've got both). Maybe I'm missing something.

EDIT: Why take the audio plugs outside the SCART?

EDIT2: Maybe it was intended for people who hadn't got component video input on their display, and maybe not audio either, so the RGB goes to the screen and the audio to speakers or hifi system.

Re: Anybody know this cable? Is it worth the money?

Posted: Mon Mar 26, 2012 5:41 pm
by pr0ton
100 euros makes no sense. There are only few capacitors and a resistor involved, and 2x RCA stereo is of course not a problem: http://www.atel-electronics.eu/produkt. ... ispLang=EN.

Editto:
Achtung:
Es müssen beide Stecker am GameCube eingesteckt werden, damit ein Bild erscheint.
Anmerkung: Dieses Kabel ermöglicht auch die RGB-Dastellung für GameCube Geräte aus Amerika und Japan.
(21.2.03,gcxm)
That is the idea, using Composite from AV-output and RGB from Digital Out to achieve SCART (RGB) connectivity for NTSC and JAP consoles. So there is a MX-chip used, and based on rarity it explains the high price..

Re: Anybody know this cable? Is it worth the money?

Posted: Tue Mar 27, 2012 7:45 pm
by WoodyWoodpecker
That is the idea, using Composite from AV-output and RGB from Digital Out to achieve SCART (RGB) connectivity for NTSC and JAP consoles. So there is a MX-chip used, and based on rarity it explains the high price..
Makes perfect sense! Thanks for clearing that up! But even with an MX-chip, I think 100€ is still way overkill. :lol: How much would you suggest bidding on it?

Re: Anybody know this cable? Is it worth the money?

Posted: Tue Mar 27, 2012 8:20 pm
by pr0ton
2nd PAL cube with SCART (RGB) is a lot cheaper than this cable, megalomaniac does it for 50 dollars with every component included (also component/SPDIF): so bidding not higher than 50 euros for me. Plus, original component costed only 20-25 euro back then..

Re: Anybody know this cable? Is it worth the money?

Posted: Tue Mar 27, 2012 9:26 pm
by megalomaniac
dont go more that 80$

Re: Anybody know this cable? Is it worth the money?

Posted: Wed Mar 28, 2012 7:27 am
by Shinebi
Just walked in: the price is for rarity only.
I was lucky enough to find me an (already rebuilt to VGA) D-terminal cable for only € 15, had to get me less than € 5 in parts and used a botchered PS2 cinch cable to make me a Q RGB cable.

Wolfsoft aren't right in the head though: I clearly remember me fixing two of their noob Xbox installs for a couple of friends.
One was hotglued to the static casing and had wires all over the board, the other one's PCB was soldered onto the Xbox MB!
I managed to desolder and place a header inbetween, but it took me almost two hours...
Even their PS2 installs failed and the copper leads shorted on the MBs...

Re: Anybody know this cable? Is it worth the money?

Posted: Thu Mar 29, 2012 4:18 pm
by WoodyWoodpecker
Shinebi wrote: Wolfsoft aren't right in the head though: I clearly remember me fixing two of their noob Xbox installs for a couple of friends.
One was hotglued to the static casing and had wires all over the board, the other one's PCB was soldered onto the Xbox MB!
I managed to desolder and place a header inbetween, but it took me almost two hours...
Even their PS2 installs failed and the copper leads shorted on the MBs...
For a console shop that's pretty bad :lol: Speaking of screwed up installs: The worst install I've ever seen was someone who tried solder a SmartXX V2
directly onto the mainboard and the result looked similar to this:

Image
Only difference was that the solder balls were roughly airsoft-pellet-sized and on top of the chip :shock:

Re: Anybody know this cable? Is it worth the money?

Posted: Thu Mar 29, 2012 5:09 pm
by _Nold_
Nice! :D
This is how Dark Helmet solders :D

Re: Anybody know this cable? Is it worth the money?

Posted: Sat Mar 31, 2012 7:58 am
by liquitt
shit not even i am THAT bad!

Re: Anybody know this cable? Is it worth the money?

Posted: Sat Mar 31, 2012 8:03 am
by megalomaniac
that is a pretty bad job...
but then again...take a look at your best soldering job and take a close up detailed pic....



but damn...that is a bad job....

Re: Anybody know this cable? Is it worth the money?

Posted: Wed Apr 11, 2012 6:30 pm
by andzlay
So did you buy it? Or someone else from the forum?

Re: Anybody know this cable? Is it worth the money?

Posted: Mon Apr 16, 2012 10:30 am
by WoodyWoodpecker
Nope, didn't buy it. Actually, there were two (one from wolfsoft and another homemade one) and I missed both of them :/ They both sold for around 50€. (Dunno if it was someone from the forums)