Hello, i've searched already on google and also here in the forum. But my questions are still not answered in the way i liked to. :oops: So here we go: First of all i have one Cube with WKF/Swiss, one with a Qoob Pro/Swiss and one with a Xeno GC and Swiss on SD2SP2. My plan was to desolder the WKF a...

Yeah, everything works flawlessly! :) BTW the first Fusion i connected, does not work, i think its DOA :(. The Second one works from Startup fine! Any Idee about the first one? Only red light will come up, somtimes the blue light flashes. Does the Fusion play all regions on my PAL Cube? For Example,...

Thanks, you're my man! Thats exactly the message i see when i turn on my cube, so i think the soldering up to now should be okay, no shorts or anything. When my Fusion arrives i will post results!

https://www.youtube.com/watch?v=acyyRUxhsVU Thx but i got the message "An error has occurred. Turn the Power Off and check the Nintendo GameCube Instruction Booklet for further instructions." is it the same or not? I hope my wiikey will arrive sone :) EDIT: Maybe my question is wrong; i s...

Check your soldering and confirm you have all those wires going to the correct location. If you think your soldering is correct, then consider this: If you are on firmware 1.0 or don't know what firmware you have, then most likely WKF is at firmware 1.0. This means you MUST connect the WKF SD slot ...

Before using your Wiikey Fusion on your GameCube you must set the region switch correctly! Else the GameCube will give you the standard error that you get when a Disc Drive is not connected to the Cube. Instuctions on how to set the region DIP switches on the Wiikey Fusion can be found here: http:/...

Ashen wrote:No, you don't have to. Is it a good idea to? Yes.

Hello Ashen, thanks, then i will bridge these connections, and all should be fine!

megalomaniac wrote:haha...with all this German talk i cant resist....
WKF cable uses a total of 10 GND pins....10 - 1 = Nein

Ooookaay... now i am really confused...

The only question i had was do i have to bridge all the even ground connections on the FFC cable/Adapter Board or Not? :O

You say Yes i have to?

Danke für Deine ausführliche Antwort! Ich finde halt das Diagramm durchaus irreführend. Ich werde das mit einem Multi mal messen!

Thx for your answer. I think the diagramm is slightly misleading.

du machst dass viel zu kompliziert. machs wie im ersten bild da is bereits alles drauf was du brauchst. du musst nicht nochmal alles brücken wenns schon gebrückt ist. english: you are thinking much complicated than it is in real, you have to solder everything like shown in the first picture. you do...

in german: bei reichelt findest du diese schalter. sind soweit ich weiß hier: http://www.reichelt.de/Schnappschalter-Endschalter/MAR-1050-7202/3/index.html?;ACTION=3;LA=2;ARTICLE=32730;GROUPID=3288;artnr=MAR+1050.7202;SID=11UOAmxX8AAAIAAF-F2m4a6d711f3b67de9303137819b9f575a16 deine zweite frage, es ...

Hi everbody, i'am from germany, i hope my english is not soooo bad! :) I have a few questions about this nice mod you have done ashen! I hope you can help me out. The first question ist about the following switch, can you tell me where i can buy such a swich or what ist the correct label for this sw...