Can the hyper boot patch the Panasonic Q? Since it’s a clone of the qoob pro at least I could gather I have a Panasonic q that I could never get working right it needs a new dvd drive and it will random resets I’ve had it forever just never got to it

So after messing with my viper GC trying to install swiss to flash with my USB programmer which did work fine 3 years ago but for some reason I could not load anything into flash with 3 computers and I don't use windows anymore only linux and macOS. I deleted swiss from cobra menu before I was about...

I would like to say that my N64 budget RGB/HDMI project has turned out wonderful. The HD retrovision component cable is not being made at this time and ebay had one for 180 dollar yea no go there. So next I was looking at those clone OSSC boxes and bought an SCART cable for the N64 so I was going to...

I will like to say that I ordered a clone of a OSSC - Frame Meister box’s and just plug the scart into that then convert it to HDMI instead I wanted to to if I could get it to work that was the point of this those hd Retrovision component cables are out of stock everywhere and so over priced it’s cr...

Ok I'm going to have to correct you. Yea you can convert it since I already did it since no one said anything and the 4th is composite Csync then ground H-sync and Vsync its a PAL version of a VGA cable with composite and left and right sound I didn't write that it can't be done at all, but that it...

My bad If I took the Ultra HDMI for anothe N64 mod I've seen before, that just hooked to the analog signal. So there are many mods that make no sense. :D Many older consoles don't even have a DAC, and getting real digital data for display can be tricky, (when even possible), see the Atari 2600 mods...

The wii's video chip sucks ass thats the whole reason we are installing GCvideo's in wiis do you think people were just doing it for the hell of it. The Gamecube's video chip is twice as better as the wii's thats a fact ask anyone I spent over 100 hours doing my own mods with GCvideo and I can firml...

No, you can't go straight from RGBs (where signal can goes through 4 wires) to YUV (where signal goes through 3 wires), you need at last some analog active chips. Don't cut the connector, find the female one to make an adapter to the display you want to connect to (BNC, sub-D HD15…), or buy a male ...

your an idiot if you sell it. I bought 4 wasp fusions when there were 25 dollars usd I still have 3 and someone just offered me 100 dollars for one and I have a megadrive V5 and 2 megadrive v6s 3 ide-exi bunch of gcvideo lites I made and DVI's I also made. Iced cube case, viper modchip New USB one, ...

What would be the point of installing the mod after the DAC that makes no sense

It’s not an analog signal It’s straight digital to digital That’s why you install it before it hits the video converter

To be fair My opinion on the ultra HDMI is that is highly overrated yes it’s very very cool and it has very cool options and it progresses in 1080P. But think about this I saw a new RGB board for the n64 and it also has a OSD and has digital sound and it’s 85 usd also I can install it myself. My big...

(translation) i’m trying to copy the ultra HDMI so I don’t have to pay 200 for it

Hello I just bought one of the better RGB mod boards for n64 and scart cable meant for use in snes. My question is can I cut the connector off stipe the wires to get to red green and blue wires solder them to a component cable (and solder the ground of course will that work? Never used or saw one of...

So it seems while I was away a closed sourced wiikey fusion came out called GCloader the only thing I would want this chip for is for audio streaming and is it possible to get it to work on the wasp/wiikey. It doesn’t look like there making anymore ether they should open source it if not that’s my o...

Extrems> We've seen with the SD2SP2 support that getting back to a long-sleeping project can be complicated. You're speaking of a complete rewrite for further improvements than only SD2SP2 support? Do you think that good quality emulation (as compatible and efficient as SNES or GBA) can be achieved...

To be honest I was really surprised at the development in 4 years I been gone I left right after gcvideo just came out and I made a few of them then took a break. I really can’t believe how fast sp2 is and gcloader also very cool. I’ve knew about hyperboot since 2014 surprised it’s taken so long to ...

I have 3 ide-exi there so slow you will use it once and never used it again I have both versions emukidds and megas same issues

Hey everyone its been a while I was working on switch "projects" for the pass couple years but got around to soldering one of these new SP2 PCBs thank you 3000psi! But anyway I can't load any homebrew like snes, Nes, sega, N64, ISOs on the other hand work good like really good really fast ...

It’s been almost 4 years and my setup with wasp mega drive v5 and gc-video dvi and autoboot sd card still works. Nice to see people are still here

Also use the 32bit impact if it still gives a error use the 64bit if that still gives a error boot the computer in safe mode Thanks for the info andre104623! I just have a question though I'm not really understanding. Is that error suppose to come up (923) for cable not detected? Because that is wh...

Also use the 32bit impact if it still gives a error use the 64bit if that still gives a error boot the computer in safe mode

Hey everyone just an update it seems like I am getting some kind of error. Gamecube powered on while the shuriken is connected. OK your almost there you need to tell impact what spi flash you have so right click on spi and a pop up box will appear. Choose the correct spi that is installed (I forget...

You want to grab the .bit and .mcs file for programming. Impact should pick up the FPGA and spi if you have everything hooked up correctly and have the GameCube powered on. There is a light on the programmer that should be orange when the cube is off then should turn green when powered on Oh that ju...

Here is the diagram