there have a problem if use QOOB IP boot and IDE-EXI HDD then can't use memory card

many thanks Webhdx

so i got to know now ,the IDE-EXI HDD just for stock the game ISO but can't working like SD2SP2 or SD Gecko for boot swiss from IDE-EXI HDD
now i can boot SWISS from SD2SP2 or QOOB IPL and then select device to IDE-EXI HDD for running Game ISO

thank you so much again Webhdx

Seems my IDE-EXI board can work now
i can see the HDD in swiss by boot from SP2(attached picture)

i think the swiss also can boot from IDE-EXI ,right?
i had copy swiss to HDD but still can't boot from IDE-EXI

where i can find the IDE-EXI use guide?

many thanks Sir

the IDE-EXI can detected from swiss by boot from SP2

seems i don't know how to use IDE-EXI Board

i just format HDD FAT32 and copied swiss file to HDD same as SP2

picture part3

picture part2

seems my subject was closed and unread so i'm here and need your help Dears i got problem for use IDE-EXI, Please any one help me you if have any idea I finished my IDE-EXI board build but it can't working use Xilinx DLC9LP usb programmer for programmed IDE-EXI-V2 and the programming was succeeded m...

picture part3

picture part2

Dears i got problem for use IDE-EXI, Please any one help me you if have any idea I finished my IDE-EXI board build but it can't working use Xilinx DLC9LP usb programmer for programmed IDE-EXI-V2 and the programming was succeeded my connection as the setup flow picture (NGC-->IDE-EXI Board-->80pins I...

two board already completed the components soldering
programmer on the way ,waiting programmer arrive for FW programming

two board already completed the components soldering
programmer on the way ,waiting programmer arrive for FW programming

i got all the elec parts and two boards already soldered all components by hand
now waiting programmer for FW programming

i received my first IDE-EXI PCB today

i received my first IDE-EXI PCB today

i think it may help if any new guy want to build IDE-EXI so i want to share my building process here

26/Oct/2021: i received IDE-EXI PCB, but i still has not order programmer and Elec part, i will order it in coming few days

it look good , i have start for order some PCB for try to build this IDE-EXI , hope i can success the build

Dear emu_kidid many thanks you hard worked on IDE-EXI project , i want to first build IDE-EXI sample and i had send a post ,could you help for review if any thing i missed or any suggestion or i can start sample build already https://www.gc-forever.com/forums/viewtopic.php?f=23&t=5064 HPXHPX Lo...

You have everything needed, just use v2 source instead: https://www.gc-forever.com/forums/viewtopic.php?f=23&t=4843 For programming I recommend using xc3sprog and FT232H board, it's probably the cheapest USB based programmer out there. I'm just hesitant to say wether I recommend building IDE-EX...

Dear emu_kidid

many thanks you hard worked on IDE-EXI project , i want to first build IDE-EXI sample and i had send a post ,could you help for review if any thing i missed or any suggestion or i can start sample build already
https://www.gc-forever.com/forums/viewt ... =23&t=5064

HPXHPX

Dear Sirs i have sd2sp2 and SD Gecko + QOOB mod for my NGC and i just got to know this IDE-EXI project in few days ago it seems a very interesting project, so i want try to build this IDE-EXI sample My prepared 1.download IDE-EXI project file "IDE-EXIdesignfiles.7z"from --> https://www.gc-...