atmega has a bootloader so by default, xeno also has a bootloader when the chip is set to program mode (RESET to GND) in the source code release are 4 (2 are the same, so 3) versions of xenoflash.dol the flash loader already contains the required hex file built into the dol. 1. use your normal dol l...

Ive flashed my chip with everything i can find in the source....here are my findings HEXFILES ../ XenoAT.1.05.hex = PAL (XenoGC Shell v1.05) --->>Multigame Shell ../Drivecode/Source/1.03a XenoAT = file does not appear to function ../XenoAT/Bin XenoAT.1.03a.v1.hex = NTSC (XenoGC v1.03a) --->> Classic...

There are some hidden commands which are not displayed in the v1.05 flashloader....
so dont push random buttons...

the Xeno or Atmega8 (Xeno clone) can be upgraded/downgraded (or initial programming for Atmega) using the various xenoflash.dol's included in the source.. In order to put the microcontroller in program(write) mode, RESET pin (1) must have constant contact with GND during the write process. The print...

great work..
that sucka is so small...

how much smaller do you think the next revision will be??

Hello This might be a little offtopic but is there another way to use the flasher DOL to flash the XenoGC to 2.0 without the need of bridging the GND to any of the XenoGC letters? I am not sure how it works, but maybe using uldorel to disable the chip before it starts to flash? Thank you. The purpo...

i dont have experience in wode connection, but as far as electrical connection for your ground situation: ground is ground.. they should all be tied together.. i dont think NOA would allow floating grounds in their design..(too many safety issues when kids are involved) check to make sure all ground...

how much progress have you made on this project?

have you successfully compiled the source?
do you have a xilinx chip?
you only want the ability to add an epprom to the existing xilinx chip?

The fastest method would be to use the available XenoGC code to make your own modchip. Only drawback, the chip you propose is not compatible since the released XenoGC code was compiled for the Atmega8 series and cannot be cross-compiled at this time...This means no current possibility to use any typ...

loaded 0.1.52A from SD... all games loaded from SD... all audio converted from wav to mp3 @ 192.0kbits/s & 44100 Hz using ffmpeg... The following games appear to play correctly with no hang issues & no sound issues: Aero Fighters 2 Aero Fighters 3 Alpha Mission 2 BustAMove CyberLip Ghost Pil...

It seems there is a global misunderstanding regarding class types of SD card. A class type defines the write speed only , not the read speed. For Swiss does a write speed of an SD card not matter. Important is the read speed. You can have the same read speed with a Class 2 SD card and a Class 10 ca...

as im in the middle of doing a facelift on my new gal, i have been considering case design functionality of Hushtrap, Viper, and Icedcube in regards to the removal of discs. Based on how much i have cut away thus far,(currently more than the pic shown above) I cannot see any easy way to remove a dis...

just to add further info for anyone who may have been wondering about the SDcard class type... A card's class is designated by the "minimum" rated speed per SD specifications..for example: Class 2 = 2MB/s Class 4 = 4MB/s Class 6 = 6MB/s Class 10 = 10MB/s so purchasing a class 4 card which ...

I put "Samantha" under the knife again to add more surgical enhancements
she is currently receiving a facelift...
just a little nip and tuck here and there


(edited post to insert pic)

Not sure if anyone else had any issues trying to use this emu but it really amazed me how little or no documentation I could find on the web concerning how to use this emu. Maybe its common knowledge for some who have been around for a while, maybe its not...but for new guys like me, its not common ...

also check to make sure your not using romsets in 7zip there is no 7zip support for this emu...and the developer does not intend to add support. try extracting individual games to /roms directory and try again from http://code.google.com/p/genplus-gx/wiki/Features Comment by psy...@holycrap.org, Jun...

i finally put my hands on a GC today for the first time in about 5yrs.....There was a break in at my other home and they stole my original 1st day release GC. After such a loss with such a great companion, i just couldnt bring myself to get another GC...It just didnt feel right to have fun with some...

i stopped caring but in somewhere in my mid 30's

Nice work mega Is there no chance to use a atmega tiny(attiny?!?)or just the same methode like the jailbreak dongels. The pic version of this dongles only have to be brund with a bood loader and could be updated via usb. Hope u understand me. im not even start talking about PIC....but, the unfortun...

question for you steffen, i see your command line includes locking the bits down. why would you want to lock em down? its not nintendo is going to develop some line of code to erase the chip...or is there any other concern? here is a cleaner way to read bits settings using uisp as opposed to using a...

I used an Arduino to flash the XenoGC sourcecode to an Atmega8 L . Take care, an ordinary Atmega8 might need a higher voltage than the GC drive can supply! Thank you for the reinforcement, steffen. Your post on the atmega was also motivation for me to get of my ass and start dev again. As you state...

hello to everyone i have been trolling this forum for quite a while and decided to register and become official. I have not found a welcome / new members area so i am posting here i have done my share of coding and dev in the past and have been idle with no real interest/time. I have been following ...