Problem with getting SDHC working on Swiss

All your console related questions and answers :)
Post Reply
Xileize
Posts: 2
Joined: Sat Jul 16, 2016 10:39 am

Problem with getting SDHC working on Swiss

Post by Xileize » Sun Jul 17, 2016 9:36 am

Hey,

I would like some assistance with getting my SDHC card up and running with Swiss.

I originally had a Lexar 4GB card that on trying to open in Swiss. When trying to open it with SD Gecko, all that would happen was that the "Reading SD in Slot B" text would come up and then return back to the main menu after 5 or so seconds. I bought a SanDisk Extreme card on the recommendation that they seem to work, but it's having the exact same problem.

I have tried both Fast and Compatible mode with no luck. I am using an SDML, so is this causing the problem?

I use a 512MB SanDisk to actually boot up Swiss, but this obviously doesn't have a great amount of space, so it is limited in its uses.

Any help would be greatly appreciated.
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Problem with getting SDHC working on Swiss

Post by megalomaniac » Sun Jul 17, 2016 10:38 am

what version of swiss are you using?
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
Xileize
Posts: 2
Joined: Sat Jul 16, 2016 10:39 am

Re: Problem with getting SDHC working on Swiss

Post by Xileize » Sun Jul 17, 2016 11:53 am

I am using r366, which I believe is the latest nightly build?

EDIT: It's probably also worth noting that I'm using a PAL GameCube.
Post Reply