Fix broken lid switch

All your console related questions and answers :)
Post Reply
vickdu31
Posts: 23
Joined: Sun Jun 18, 2017 12:54 pm

Fix broken lid switch

Post by vickdu31 » Sat Jul 18, 2020 2:16 pm

Hi!
I broke the thing that I don't know what to call, please tell me how to call it so I can rename thread...

Here are the pics of the pcb. i broke two of these similarly..

https://postimg.cc/gallery/3hJwrMF

I think i would like to short sope of the pins so that the gamecube always think it is closed and spin the disc at all times (so we will need to power off to swap discs but that ok).
Last edited by vickdu31 on Sun Jul 19, 2020 5:52 am, edited 1 time in total.
User avatar
ShredderN64
Posts: 10
Joined: Mon Aug 18, 2014 6:56 pm

Re: Fix broken DVD plastic thing to check tray status

Post by ShredderN64 » Sat Jul 18, 2020 11:41 pm

Most people just call it the lid switch or PIN 29. You should be able to solder those blue wires together and be fine.

For future reference, when reassembling a GameCube, you'll want to have the lid on the top half of the case open before putting it back together, or the plastic tab will break the lid switch.
vickdu31
Posts: 23
Joined: Sun Jun 18, 2017 12:54 pm

Re: Fix broken lid switch

Post by vickdu31 » Sun Jul 19, 2020 6:01 am

Thanks!
I think i will try to solder on the pcb: http://www.honkeykongcountry.ee/2017/04 ... or-switch/

I have no idea when it happened, i currently have 7 cubes some broken some of so i just swap parts all the time and i never paid attention to this fragile part!
Post Reply