Hi,
So I have component cable with an intermittent break in the banding(?) on the left side of my picture. I know how to fix it, cut it open, find the break, patch, seal it back up. HOWEVER, this being a Gamecube component cable, I'd rather not just tear into it and then cover it with electrical tape. Does anyone know of any minimally destructive method(s) to fix it? My best idea so far is to carefully slice it down the side on the seam and then carefully glue it back together; I overall want to keep the look of the cable as it is since they're so coveted. http://imgur.com/a/Tv0XJaq
Slightly damaged component cable
Re: Slightly damaged component cable
I don't see anything broken in your picture, but I can tell you vinyl glue (for wood) can be quite helpful to repair electrical cable protection, (IE: when your rat or rabbit bite it).
If you have an electrical issue (problem with console display), you may need to open the cable, and you'll end up with a quite noticeable repair anyways.
If you have an electrical issue (problem with console display), you may need to open the cable, and you'll end up with a quite noticeable repair anyways.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)