Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File
Posted: Fri Apr 06, 2012 8:42 am
so even in times of WODE and WKF this seems to be on people's wishlist
Gamecube/Wii support & news forums
https://www.gc-forever.com/forums/
I saw here in Brazil easy 50 units in 20/30 days at most if you can make some units, and an attractive price I picked up some pieces (one course for me, for my "EXI-IDE diy " not working, I have done something wrong) then tell me why this is true if "private messages" ok .emu_kidid wrote:I have it at about $1200 for 100 fully made if I re-use the same factory as before (excluding postage fees for the xilinx back and fourth from supplier to factory and then the ide-exi's themselves to me and to you), so about $15-$20 each.
i would also like 1 or 2 if its possible??BuckoA51 wrote:I just found out about this today, I'd very much like to get one of these adapters to play with, I'm incompetent when it comes to soldering so I'd have to buy one, if any are available please let me know!
foxconn want to hire you.emu_kidid wrote:I had a little fan going for air extraction, but I really felt like a chinese factory worker for a little while
Well emu I made a topic about making a third batch and if there is a demand and everything goes as planned I'm going to donate 10% of my profits to your siteemu_kidid wrote:Nice, I don't think there is much demand these days though sadly.
I thought it was for flashing the chip only then it could be removed. yeah I noticed I got stuck under the memory card slotmegalomaniac wrote:You might want to get rid of C1 if you run into problems removing the PCB from the card slot
Oh well its a little late for that but I'll remember that when I'm doing the GCvideo project. I have a xilinx usb programmer I should know this but I'll be fine flashing the GC video with this programmer correctemu_kidid wrote:You don't need to solder pins in for jtag, just use a header on your programmer and hold it there whilst programming.
you can use your xilinx programmer if you plan to convert the code over for xilinx....andre104623 wrote:I have a xilinx usb programmer I should know this but I'll be fine flashing the GC video with this programmer correct
Looks like webhdx has already helped you out. Make sure you use the v2 files from here (https://www.gc-forever.com/forums/viewt ... =23&t=4843) thoughhpxhpx wrote: ↑Wed Oct 20, 2021 6:43 amDear emu_kidid
many thanks you hard worked on IDE-EXI project , i want to first build IDE-EXI sample and i had send a post ,could you help for review if any thing i missed or any suggestion or i can start sample build already
https://www.gc-forever.com/forums/viewt ... =23&t=5064
HPXHPX