gc-forever - Gamecube/Wii Forums

emu_kidid wrote: ↑

Thu Oct 21, 2021 12:21 am

hpxhpx wrote: ↑

Wed Oct 20, 2021 6:43 am

Dear emu_kidid

many thanks you hard worked on IDE-EXI project , i want to first build IDE-EXI sample and i had send a post ,could you help for review if any thing i missed or any suggestion or i can start sample build already
https://www.gc-forever.com/forums/viewt ... =23&t=5064

HPXHPX

Looks like webhdx has already helped you out. Make sure you use the v2 files from here (https://www.gc-forever.com/forums/viewt ... =23&t=4843) though

many thanks
i have download the V2 FW, will start for order some PCB, If any suggestion please free feel for share

i received my first IDE-EXI PCB today

two board already completed the components soldering
programmer on the way ,waiting programmer arrive for FW programming

seems my subject was closed and unread so i'm here and need your help

Dears

i got problem for use IDE-EXI, Please any one help me you if have any idea
I finished my IDE-EXI board build but it can't working
use Xilinx DLC9LP usb programmer for programmed IDE-EXI-V2 and the programming was succeeded
my connection as the setup flow picture (NGC-->IDE-EXI Board-->80pins IDE cable-->IDE to SATA board-->HDD)
HDD Format FAT32, Copy Swiss 1086 to HDD

By the way ,my NGC can boot by sd2sp2

picture part1

picture part2

picture part3

Are you sure your boot method can boot off IDE-EXI?
Try to boot SWISS off your SP2 device first, then see if it can see your hd.

Check github for updates.

many thanks Sir

the IDE-EXI can detected from swiss by boot from SP2

seems i don't know how to use IDE-EXI Board

i just format HDD FAT32 and copied swiss file to HDD same as SP2