Disc reading error

Chat, Off-topic, Research & Development etc
Post Reply
LeroyD36-
Posts: 1
Joined: Fri Jun 30, 2023 10:08 pm

Disc reading error

Post by LeroyD36- » Fri Jun 30, 2023 10:16 pm

So D01-001 was not reading discs, I adjusted laser and still not good, So I swapped the optical drive from my working GameCube to my bad one, and still would not read disc, Disc spins and laser try’s to find disc but stops spinning and gets error, Any ideas on what is going on?
Top
User avatar
Diego borella
Posts: 249
Joined: Sat Jan 11, 2020 8:37 pm
Location: Brazil

Re: Disc reading error

Post by Diego borella » Sat Jul 01, 2023 3:16 pm

you may be with some alternatives:

1 you must adjust the laser again for the new reader...
2 your disk is not good

3 drive capacitor pack must be replaced
:idea: :geek: SWISS USER :geek: :idea:
DEBUG IS NECESSARY :arrow: :ugeek:
Top
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:
Contact emu_kidid

Re: Disc reading error

Post by emu_kidid » Thu Jul 06, 2023 3:41 am

Wrong region of disc for the system? What portion of the drive did you swap exactly?
Image
Top
Post Reply

Return to “General Discussion”