Page 12 of 32

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 9:41 am
by HoTep
Tested Swiss-TEST on a Pal Wii. Still Problem did not recognize Orginal Disk in Drive.
Select GCM File press A to start "Error". I have a new Wii backup resistent.
Thanks for your Work !

SD-Boot 0.4 works without Problems.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 9:44 am
by DSman59
emu_kidid, could you please look into the problem all Splinter Cell games seem to have? Double Agent and Chaos Theory both stop at the first loading screen. Keep up the good job! :)

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 10:49 am
by emu_kidid
DSman59, ok - issues like that are more fun to work on rather than "all my games have a black screen".

To all those getting a black screen on boot, please try different SD cards/games/A GAMECUBE.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 12:03 pm
by ha100
Thank you emu_kidid. Mario Power Tennis NTSC works with your test version. PAL version does not. No sound, black screen after the Waluigi and Wario intro. But I'm happy with the NTSC version. Thanks again. Swiss seems to work more stable with the gecko sd. With sd-boot the gecko wasn't recognized until I take it out and put it back in. And I can browse the sd card. All better then sb-boot. I hope that you'll make a wonderful app out of this. Usb drive support would be the ultimate.
I don't play much gc games anymore. But Mario tennis, Cart and a few more are still among our favorite games. If these can be made totaly compatible that would be great. There are some glitches in the intro's, not in the gameplay though, wich is of course the most important. Can I fill in the compatibility list, or who does that?

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 12:27 pm
by emu_kidid
Yes the compatibility list is for everyone to fill out.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 2:12 pm
by KirovAir
Thanks for the update(s)!
Seriously, since these latest gamecube-scene developments, I'm in love with my gamecube again. :D

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 4:38 pm
by Kemosabe-TBC
Ok, some weird stuff is going on, but finally I got Tales of Symphonia to work!

Rev29
- ToS Didn't work, got the same black screen after the intro video.

New test version
- I tried first loading SD-boot 0.4, then loading Swiss from within sdboot. The .gcm got deleted before I even loaded the game! As soon as I got to the swiss screen puff... The file was down to 1kb.
- I copied the file again and did the same thing, loaded SD-boot then swiss. This time the file was still intact, but it didn't work I got a "Error OK" error (there was an original GC game in the drive)
- I tried again, this time I loaded Swiss test version directly using Wiipower's loader. It WORKED, finally, I didn't get a black screen after the video.

PS: I should note that this is the only game, I've tried so far, that I get a black screen using Swiss.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 5:04 pm
by yamaharacer
main problem with black screen is that your hdd isnt compatible. on different german forums there were people who have the same error. they can select games and swiss detects the hdd but doesnt load the games and ends in black screens. everyone who changed the hdd to an other one have solved that error and can now load games without problems.

use an other hdd (newer one) and an other ide cable maybe and you will see it will work.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 5:15 pm
by Kemosabe-TBC
yamaharacer wrote:main problem with black screen is that your hdd isnt compatible. on different german forums there were people who have the same error. they can select games and swiss detects the hdd but doesnt load the games and ends in black screens. everyone who changed the hdd to an other one have solved that error and can now load games without problems.

use an other hdd (newer one) and an other ide cable maybe and you will see it will work.
Were you talking to me? I never used any hdd, only SD card. And I never got any black screen except with Tales of Symphonia (and the game always loaded, the black screen was only after the video).

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 5:47 pm
by yamaharacer
ok than its my fault. but there are a lot of people who post that they got black screen when using swiss with an hdd. i can only say that they should change the hdd to an other one. like i said the hdd is the main problem. most time it looks that it works and swiss can detect the hdd and also detects the isos or other data. but when you load anything it ends in a black screen.
all people that i have said that they should change the hdd play now their games without problems from hdd.


sometimes people also use isos or gcm data from the internet which are corrupt and also dont load or make errors like yours. just use sdboot v0.4 and install tales of symphonia once again. then use swiss and load it. thats how I install my games and it works.

Re: Swiss 0.1

Posted: Sun Feb 13, 2011 6:16 pm
by Ardiloso
emu_kidid wrote:DSman59, ok - issues like that are more fun to work on rather than "all my games have a black screen".

To all those getting a black screen on boot, please try different SD cards/games/A GAMECUBE.
Uhmmm. Then take a look at RE Zero's (NTSC) ingame slowdowns will you? :lol:

Thanks. :mrgreen:

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 12:30 pm
by ALSINJAN
I've used SD-Boot 0.4 for my backups of GC without DVD, pressing the red button on the GC controller.
Are you going to implement this feature in Swiss?

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 12:36 pm
by emu_kidid
Yes, all this weekend hopefully if I find some time, no promises as usual.

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 2:11 pm
by ct_the_1
emu_kidid wrote:[...] no promises as usual.
There are no promises, but you always get the things done. :mrgreen:

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 3:27 pm
by Lupin
Can I use Swiss in my Nintendo Wii with SD Geckko?

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 3:50 pm
by yamaharacer
yes you can

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 4:08 pm
by Lupin
I've tried yesterday with HBC without sucess.
I've maked a folder with the name Swiss inside the folder app, i've puted the boot.dol inside it and tried to run, but my wii returns with an error. What am I doing wrong?

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 4:28 pm
by yamaharacer

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 5:09 pm
by Lupin
Thank you!

Re: Swiss 0.1

Posted: Wed Feb 16, 2011 6:55 pm
by Guanako
Swiss r29:

Metroid Prime 2 Echoes is now working for me, just some minor slow in action (but it`s not a problem for me). I couldn`t get it works with any sdboot.

Re: Swiss 0.1

Posted: Thu Feb 17, 2011 12:25 am
by ha100
I would like the red button no dvd very much too. Like in sd-boot.

Re: Swiss 0.1

Posted: Thu Feb 17, 2011 11:07 am
by ALSINJAN
Lupin wrote:Can I use Swiss in my Nintendo Wii with SD Geckko?
Read this tutorial:

http://www.wiihacks.com/other-faq-guide ... apter.html

Re: Swiss 0.1

Posted: Thu Feb 17, 2011 5:33 pm
by DSman59
Is there any progress with Splinter Cell games?

Re: Swiss 0.1

Posted: Thu Feb 17, 2011 6:16 pm
by ha100
I bought a class 10 sd card for my sd Gecko and now all my games work. No matter if they're PAL or NTSC. Even patched Nintendo 64 games work. Incredible. They work in the test version Emukidid made. In the R29 release they do not. Why is that Emu? There are always some glitches especialy in intro videos in most games but in game it runs very nice. If these glitches could be resolved and the red no dvd button and a return to swiss back form game could be impemented this would be one of the best wii apps.

Re: Swiss 0.1

Posted: Thu Feb 17, 2011 8:02 pm
by andzlay
I also have some glitches in video sequences and sometimes in the game but they're really short it's all playable. good work!