I created a Docker container which can be used as an FSP server to run your GameCube images.
See https://hub.docker.com/r/frenskefrens/fsp-server for use on intel/Synology Nas with Intel processor and https://hub.docker.com/r/frenskefrens/fsp-server-arm for use on Raspberry Pi/Arm. (Raspberry Pi 4 is recommended however)
Frenskefrens
FSP Server in a Docker container available
-
- Posts: 2
- Joined: Wed Aug 18, 2021 4:27 pm
FSP Server in a Docker container available
Last edited by frenskefrens on Wed Aug 18, 2021 7:06 pm, edited 3 times in total.
Re: FSP Server in a Docker container available
Do not use a Raspberry Pi. A Pi 4 might work, but even a 20 years old computer will be more responsive than the earlier USB Ethernet models.
-
- Posts: 2
- Joined: Wed Aug 18, 2021 4:27 pm
Re: FSP Server in a Docker container available
Raspberry PI is indeed not recommended. I updated the post to use at least a RPI4. Other platforms like a Synology NAS with Intel work great.
Re: FSP Server in a Docker container available
Will it work on a sbc with an AMD Geode LX800 as seen in some network hdds?
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)