Interference?
Interference?
Hi guys, just wondering if anyone knows why I might be getting this kind of problem. It looks a little bit too extreme to just be normal interference. I'm wondering if it might be my regulators because it occasionally doesn't happen (usually after I mess around with a regulator).
- Attachments
-
- IMG_20150105_071849_zpsa354e63f.jpg
- (118.8 KiB) Not downloaded yet
-
- IMG_20150105_071839_zpsd5058a5c.jpg
- (146.18 KiB) Not downloaded yet
-
- IMG_20150105_071825_zps55f56078.jpg
- (158.48 KiB) Not downloaded yet
-
- IMG_20150105_071807_zps2fd36f17.jpg
- (124.93 KiB) Not downloaded yet
Re: Interference?
That looks fairly severe, I'd re-check your major voltages and make sure nothing is shorting out.
Re: Interference?
Thanks for the reply emu, that makes a bit more sense because it would be strange that interference only effects the bottom half of the screen ...
and also I forgot the mention that as far as I can tell the problem get's worse the longer I turn on the cube would that happen for a short?
and also I forgot the mention that as far as I can tell the problem get's worse the longer I turn on the cube would that happen for a short?
Re: Interference?
Check to make sure there aren't any crazy heat issues happening.
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Interference?
can you output video to a TV or other monitor to compare results??
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
Re: Interference?
Nice repost.
Re: Interference?
Hey thanks for the help guys I just figured out my problem. Basically my problem was the 1.8v line came loose. The reason why the problem was fixed when I adjusted the regulators was due to me pulling the regulators out to inspect them and in the process shifted the 1.8v wire into a more stable position.
@master - haha yeah but these are different forums so (this post was pretty much copied and pasted too haha)
@master - haha yeah but these are different forums so (this post was pretty much copied and pasted too haha)
Re: Interference?
At least you kept both sides of the conversation updated